Models > 12AE9

12AE9 Lawn Mower - Overview

Models starting with 12AE9

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Carburetor Overhaul Kit – Part Number: 498260
Carburetor Overhaul Kit
★★★★★
★★★★★
(4)
PartSelect #: PS8984098
Manufacturer #: 498260
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of r...
$17.96
  In Stock
Order within the next 10 hrs and your part ships today!
Mulching Blade – Part Number: 942-0741A
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to produce fine clipping...
$32.37
  In Stock
Order within the next 10 hrs and your part ships today!
Air Cleaner Gasket – Part Number: 795629
Air Cleaner Gasket
★★★★★
★★★★★
(3)
PartSelect #: PS9138757
Manufacturer #: 795629
The Air Cleaner Gasket is used to provide a seal between the air cleaner base, and carburetor. It's a gray, composite material part, which is rated as "Easy" to install and will require a screw driver...
$5.19
  In Stock
Order within the next 10 hrs and your part ships today!
Primer-Carburetor (7/8"Dia. Fits BS Quantum Engines 5, 5.5 &6 HP – Part Number: 694395
Primer-Carburetor (7/8"Dia. Fits BS Quantum Engines 5, 5.5 &6 HP
★★★★★
★★★★★
(2)
PartSelect #: PS9067198
Manufacturer #: 694395
$4.99
  In Stock
Order within the next 10 hrs and your part ships today!
Kit-Needle/Seat – Part Number: 398188
Kit-Needle/Seat
★★★★★
★★★★★
(1)
PartSelect #: PS8963322
Manufacturer #: 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle...
$6.91
  In Stock
Order within the next 10 hrs and your part ships today!
Engine Gasket Set – Part Number: 590508
Engine Gasket Set
★★★★★
★★★★★
(1)
PartSelect #: PS9036317
Manufacturer #: 590508
This genuine OEM engine gasket set is sourced directly from the manufacturer and includes the gaskets needed to seal the components in a gas-powered engine. This set ensures proper fit and performance...
$37.66
  In Stock
Order within the next 10 hrs and your part ships today!
Gasket-Crankcase – Part Number: 692232
Gasket-Crankcase
★★★★★
★★★★★
(1)
PartSelect #: PS9066140
Manufacturer #: 692232
This part is the replacement gasket for the crankcase on your engine. The gasket helps to create a seal on the crankcase and prevent leaks. If you notice that your engine is not running at peak perfor...
$6.39
  In Stock
Order within the next 10 hrs and your part ships today!
Pulley/Spring Assembly – Part Number: 498144
Pulley/Spring Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS8988822
Manufacturer #: 498144
$20.78
  In Stock
Order within the next 10 hrs and your part ships today!
Bowl-Float – Part Number: 796611
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS9306908
Manufacturer #: 796611
$7.06
  In Stock
Order within the next 10 hrs and your part ships today!
Starter-Rewind – Part Number: 497680
Starter-Rewind
★★★★★
★★★★★
(2)
PartSelect #: PS8981884
Manufacturer #: 497680
This recoil starter is for lawn and garden equipment engines. Recoil starter spins the crankshaft to start the engine when you pull the rope.
$54.25
  In Stock
Order within the next 10 hrs and your part ships today!
Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063
Nut, Flange Lock, 5/16-18, Grf
PartSelect #: PS9092936
Manufacturer #: 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant t...
$3.99
  In Stock
Order within the next 10 hrs and your part ships today!
Bell Blade Support – Part Number: 736-0524B-1
Bell Blade Support
PartSelect #: PS17016260
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$5.84
  In Stock
Order within the next 10 hrs and your part ships today!
View More
Back to Top

Common Symptoms of models starting with 12AE9

[Viewing 2 of 2]
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Mower blade does not cut
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Read less
Parts Used:
Starter-Rewind
  • Seikai from MARICOPA, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mower body was die cast and in good condition. Engine was burning oil.
Removed engine, no specialty tools required. Honed the cylinder, and lapped the valves. Tip on compressing valve spring for reassembly; compress springs with you finger and tie them with 2 zip ties, cut the zip ties after installing the keepers. Repainted the mower deck and engine. It runs and looks like new. My Toro is a 1999 model .
Parts Used:
Engine Gasket Set Ring Set-Standard
  • Robert from TEGA CAY, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
slow delivery
I paid extra to get the item . Received a delivery date, a couple days before date ,received notification it was going and in California and delivery would be another week. Immediately I ordered the carburator from another supplier and received it three days before parts select came in. It was installed and used AND with NO SHIPPING CHARGES>
I returned parts select item for refund. WILL NEVER EVER ORDER FROM THEM AGAIN and I paid extra for shipping which I will not get back. Poor service and they still blame delivery on pandemic, NO ONE ELSE seems to have that PROBLEM,.Vincent K
Read less
Parts Used:
Carburetor
  • Vincent from ELDORA, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top