Models
>
12AD
12AD Lawn Mower - Overview
Models starting with 12AD
Click on the best match to narrow your results.
- 12AD449P701 (2004) Yard Man Lawn Mower (Lawn Mower)
- 12AD449R401 (2003) Yard Man Lawn Mower (Lawn Mower)
- 12AD449R401 (2002) Yard Man Lawn Mower (Lawn Mower)
- 12AD465E401 (2003) Yard Man Lawn Mower (Lawn Mower)
- 12AD465E452 MTD Lawn Mower (MTD Lawn Mower Model 12AD465E452 Parts)
- 12AD465E452 ( 2003 ) Yard Machines Lawn Mower (Lawn Mower)
- 12AD466N063 (2002) Troy-Bilt Lawn Mower (Tuff-Cut 220 Walk-Behind Mower)
- 12AD565E790 MTD Lawn Mower (MTD Lawn Mower Model 12AD565E790 Parts)
- 12AD566N063 ( 2002 ) Troy-Bilt Lawn Mower (Gas Walk-Behind Lawn Mower)
- 12AD566N063 (2003) Troy-Bilt Lawn Mower (Tuff-Cut 220 Walk-Behind Mower)
- 12AD566N711 (2004) Troy-Bilt Lawn Mower (Tuff-Cut 220 Walk-Behind Mower)
- 12AD566N766 (2004) Troy-Bilt Lawn Mower (Tuff-Cut 220 Walk-Behind Mower)
- 12AD569R401 (2002) Yard Man Lawn Mower (Lawn Mower)
Keep searches simple, eg. "belt" or "pump".
Front Lawn Mower Drive Wheel
PartSelect #: PS9455101
Manufacturer #: 734-04018C
This is a genuine OEM replacement part, it is sold individually.
This is the front wheel on the models shown below.
There are two of them on each mower.
The wheel has a ring gear on the inside whic...
No Longer Available
Mulching Blade
PartSelect #: PS9169783
Manufacturer #: 942-0741A
This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to produce fine clipping...
$32.37
In Stock
Lawn Mower Ground Drive Belt
PartSelect #: PS9172714
Manufacturer #: 954-04032B
3/8 x 36-1/8-inch
This ground drive belt (part number 954-04032B) is for lawn mowers.
Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels.
Wear work glov...
$27.39
In Stock
Bell Blade Support
PartSelect #: PS17016260
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$5.84
In Stock
Nut, Flange Lock, 1/4-20, Grf
PartSelect #: PS9299574
Manufacturer #: 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when pr...
$3.99
In Stock
Side Discharge Deflector
PartSelect #: PS10005504
Manufacturer #: 731-04177
The Side Discharge Deflector, also known as a discharge chute, is a black plastic part used to direct glass clippings out from under the deck of the mower. This manufacturer-certified part has been ra...
$18.44
In Stock
Blade Adapter #6 X 2.15 W/ Star
PartSelect #: PS9302902
Manufacturer #: 748-0377E
$18.48
Special Order
Common Symptoms of models starting with 12AD
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The treads on the front drive wheels were worn down to the point that they provided little traction.
Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.
Parts Used:
-
MICHAEL from Kennewick, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front drive wheels were wore out
-
Ronald from WAYNE, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
Parts Used:
-
Jay from GERRY, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!