Models > 1255AF-CLW

1255AF-CLW Admiral Oven - Overview

Get Parts and Repair Help for 1255AF-CLW

If you know the oven repair part you need, you can browse the list of all parts on the 1255AF-CLW, or you can search by name or part description. You can also find your part by where it is located on the 1255AF-CLW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for 1255AF-CLW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 1255AF-CLW [Viewing 3 of 3]

$2.52

Light Bulb - 40W

Sold individually.

$53.76

Bake Element - 240V

This spade-style bake element has push-on wire terminals and is found on the bottom of the oven.

$2.70

Screw

This screw is sold individually.

$2.77

Screw - sold individually

$13.25

Clock Knob

Sold individually.

$33.50

Oven Rack

$32.03

Window Gasket

$43.76

Selector Switch

$3.86

Hinge Pin

$44.70

RACK-OVEN

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

bottom heating element in oven disintegrated

  • Customer: DENISE from GERMANTOWN TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 20 of 22 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I threw away the old pieces.

Then I connected the two wires on the new element. I pushed the wires back in the insulation in the wall of the cabinet. Then I inserted the two screws and tightened them in.read more

Oven heating element blew out

  • Customer: Shirley from Dallas TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 9 of 10 people found this instruction helpful
Removed 2 screws, pulled element out. My husband used an ohmmeter to see if the electricity needed to be turned off. It showed no voltage. He could not remove electrical connectors by hand, so he used insulated pliers. When he touched the connectors, a shower of sparks covered the inside of the oven and tripped the breaker switch. Then we noticed the pl... read more

Rubber gasket failed due to age

  • Customer: Mary from Woodland WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 8 of 12 people found this instruction helpful
I learned that I could clean the window in the oven door. In taking it apart I saw that the gasket had fallen into the oven door. I found the part online, it arrived in three days. I removed the metal part of the door, removed what was left of the old gasket and put in the new one. Put the metal part of the door back on, and it was as good as new. read more