Models > 1233Z1A

1233Z1A Roper Range - Overview

Get Parts and Repair Help for 1233Z1A

If you know the range repair part you need, you can browse the list of all parts on the 1233Z1A, or you can search by name or part description. You can also find your part by where it is located on the 1233Z1A by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 1233Z1A parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$19.95

Dryer Door and Washer Lid Switch Kit

This kit is simple on/off mechanism that prohibits the machine from operating when the door is open.

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

$43.32

Delta Frame Surface Unit - 6"

This delta frame surface element with looped terminal ends and has four turns. It carries 1500 watts and is used on some of Whirlpool/Kenmore's brands of electric ranges. The cente...

$17.77

Burner Control Knob

Sold Individually.

$47.05

Broil Element

This five loop broil element has a hanger style mount.

Door Handle Spring

$36.71

BELT

SWITCH-WL

Washer

$28.25

Hi-limit Thermostat

This thermostat is used for Canadian models only.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lid closes, switch wouldn't turn on machine.

  • Customer: Kenneth from Wilmington IL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 15 of 18 people found this instruction helpful
Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. Time on my job doesn... read more

Washer would fill up, wash, then stop

  • Customer: Glen from Plano TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 11 of 12 people found this instruction helpful
I deduced the lid switch was the problem.

I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed it on it's side on ... read more

The Dryer stopped working completely.

  • Customer: Elyse from Chicago IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 10 of 13 people found this instruction helpful
I looked up the procedure to remove the switch in a repair book, removed the broken switch. Then I reconnected the wire leads, put the part in and closed everything up. The part arrived so quickly and there were even instructions with the part which made the repair go so easily. read more