Models
>
1219
1219 Troy-Bilt Tiller - Overview
Models starting with 1219
Click on the best match to narrow your results.
- 12190 ( 121901100101-121901199999 ) Troy-BiltTiller (3hp Roto-Tiller)
- 121903HP ( 121901100101-121901199999 ) Troy-BiltTiller (12190 3hp Roto-Tiller (S/N 121901100101-121901199999))
- 12191 ( 121911100101-121911199999 ) Troy-BiltTiller (5hp Roto-Tiller)
- 121915HP ( 121911100101-121911199999 ) Troy-BiltTiller (12191 5hp Roto-Tiller (S/N 121911100101-121911199999))
- 12193 Troy-BiltTiller (Econo-Horse 6.5hp Opc)
- 12193 ( 121931100101-121931199999 ) Troy-BiltTiller (6.5hp Roto-Tiller)
- 1219365HP ( 121931100101-121931199999 ) Troy-BiltTiller (12193 6.5hp Roto-Tiller (S/N 121931100101-121931199999))
- 12194 ( 121941100101-121941199999 ) Troy-BiltTiller (Horse-Opc 8hp Rototiller)
Exact Part matches for your search term
[Viewing 2 of 2]
DISCONTINUED
This part number matches the current model number 1219
PartSelect #: PS320313
Manufacturer #: 1219
No Longer Available
SLEEVE-WORM SPACER
This part number matches the current model number 1219
PartSelect #: PS9444882
Manufacturer #: 1219
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Cable Assembly, Forward Clutch
PartSelect #: PS9463630
Manufacturer #: GW-55048P
No Longer Available
Forward Idler Pulley
PartSelect #: PS9457633
Manufacturer #: 756-04170
This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part ...
No Longer Available
Keyed Washer 1.0 X 0.38 X 0.37
PartSelect #: PS9455313
Manufacturer #: 736-04445
No Longer Available
Top Locknut, 5/16-18
PartSelect #: PS9453902
Manufacturer #: 712-3004A
This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part...
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bearing seized
Pull belt cover, 2 nuts
Remove tensioner, 1 nut
Slide old tensioner off and replace
Remove tensioner, 1 nut
Slide old tensioner off and replace
Parts Used:
-
Gary from ELGIN, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1inch shaft and wheels have to be removed first.
Wheels had to be cut off of the axle in order to get to the seals. The center of wheel is 3in wide and axle isn't tappered on troy bilt pony model wheels where rusted on.
Parts Used:
-
Norman from RAINIER, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!