Models > 121600

121600 Briggs and Stratton Engine - Overview

Sections of the 121600

[Viewing 14 of 14]
Air Cleaner Diagram and Parts List for Briggs and Stratton Engine
Air Cleaner
Armature Diagram and Parts List for Briggs and Stratton Engine
Armature
Carburetor 1 Diagram and Parts List for Briggs and Stratton Engine
Carburetor 1
Carburetor 2 Diagram and Parts List for Briggs and Stratton Engine
Carburetor 2
Control Bracket Diagram and Parts List for Briggs and Stratton Engine
Control Bracket
Crankshaft/Dipstick Diagram and Parts List for Briggs and Stratton Engine
Crankshaft/Dipstick
Cylinder Assembly Diagram and Parts List for Briggs and Stratton Engine
Cylinder Assembly
Exhaust Muffler Diagram and Parts List for Briggs and Stratton Engine
Exhaust Muffler
Flywheel Diagram and Parts List for Briggs and Stratton Engine
Flywheel
Fuel Tank Diagram and Parts List for Briggs and Stratton Engine
Fuel Tank
Gasket Set Diagram and Parts List for Briggs and Stratton Engine
Gasket Set
Rewind Starter Diagram and Parts List for Briggs and Stratton Engine
Rewind Starter
Starter Armature Diagram and Parts List for Briggs and Stratton Engine
Starter Armature
Sump Diagram and Parts List for Briggs and Stratton Engine
Sump
Keep searches simple, eg. "belt" or "pump".
Kit-Needle/Seat – Part Number: 398188
Kit-Needle/Seat
★★★★★
★★★★★
(1)
PartSelect #: PS8963322
Manufacturer #: 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle...
$6.97
  In Stock
Pulley/Spring Assembly – Part Number: 498144
Pulley/Spring Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS8988822
Manufacturer #: 498144
$20.78
  In Stock
Starter-Rewind – Part Number: 497680
Starter-Rewind
★★★★★
★★★★★
(2)
PartSelect #: PS8981884
Manufacturer #: 497680
This recoil starter is for lawn and garden equipment engines. Recoil starter spins the crankshaft to start the engine when you pull the rope.
$54.79
  In Stock
Float-Carburetor – Part Number: 398187
Float-Carburetor
PartSelect #: PS8961149
Manufacturer #: 398187
$10.55
  In Stock
Dipstick – Part Number: 499621
Dipstick
★★★★★
★★★★★
(1)
PartSelect #: PS9281501
Manufacturer #: 499621
$17.35
  In Stock
Tube-Dipstick – Part Number: 495265
Tube-Dipstick
PartSelect #: PS8988309
Manufacturer #: 495265
  No Longer Available
Puller-Flywheel – Part Number: 19069
Puller-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8905794
Manufacturer #: 19069
$20.62
  In Stock
Jet-Main – Part Number: 494870
Jet-Main
PartSelect #: PS8983457
Manufacturer #: 494870
$14.11
  Special Order
Shaft-Choke – Part Number: 499681
Shaft-Choke
PartSelect #: PS8982301
Manufacturer #: 499681
$30.64
  In Stock
Ring Set-Standard – Part Number: 499631
Ring Set-Standard
PartSelect #: PS8989320
Manufacturer #: 499631
$53.30
  In Stock
Jet-Main – Part Number: 498978
Jet-Main
PartSelect #: PS9281472
Manufacturer #: 498978
$15.55
  Special Order
Gasket-Intake – Part Number: 692668
Gasket-Intake
PartSelect #: PS9075631
Manufacturer #: 692668
$4.99
  In Stock
View More
Back to Top

Questions And Answers for 121600

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top

Common Symptoms of the 121600

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Read less
Parts Used:
Starter-Rewind
  • Seikai from MARICOPA, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top