Models
>
12090
12090 Troy-Bilt Tiller - Overview
Models starting with 12090
Click on the best match to narrow your results.
- 12090 Troy-Bilt Tiller (PTO Horse Tiller)
- 12090 ( 120900100101-UP ) Troy-Bilt Tiller (12090 Horse-Opc (7&8hp) Rototiller (S/N 120900100101-Up))
- 12090 ( 120901100101-UP ) Troy-Bilt Tiller (12090 Horse-Opc (7&8hp) Rototiller (S/N 120901100101-Up))
- 12090C ( 120900100101-UP ) Troy-Bilt Tiller (Horse-Opc (7 And 8hp) Rototiller)
Exact Part matches for your search term
[Viewing 3 of 3]
DISCONTINUED
This part number matches the current model number 12090
PartSelect #: PS4257324
Manufacturer #: 12090
No Longer Available
Frame
This part number matches the current model number 12090
PartSelect #: PS12183641
Manufacturer #: 12090
No Longer Available
Screw
This part number matches the current model number 12090
PartSelect #: PS16264103
Manufacturer #: 12090
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Oil Seal (OD 1- 3/4" ID 3/4")
PartSelect #: PS9161264
Manufacturer #: 921-04030
This Oil Seal has an OD of 1-3/4" and ID of 3/4". Installation of this OEM seal requires a screwdriver, pliers, socket set and wrench set, and is rated as being "Medium" difficulty by customers. This ...
$12.38
In Stock
Rod-Belt Adjust., 7" With Measuring Gauge
PartSelect #: PS9463539
Manufacturer #: GW-2100
No Longer Available
Ignition Switch: 5 Pin
PartSelect #: PS9310387
Manufacturer #: 925-0267B
This OEM 5 Pin ignition Switch is a silver, steel, individually sold part. It can be installed using a wrench and screwdriver, and has been rated as Easy to install. The part attaches to the dashboard...
$36.40
In Stock
Keys (Pair)
PartSelect #: PS9171554
Manufacturer #: 925-0201
This pair of keys is supplied by the equipment manufacturer for use in lawn and outdoor power equipment. The key is made of metal and designed to prevent unauthorized use or accidental starting of the...
$9.52
In Stock
Bushing-Spacer, 19/64" (.300")
PartSelect #: PS9463213
Manufacturer #: GW-1113-1099
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
1inch shaft and wheels have to be removed first.
Wheels had to be cut off of the axle in order to get to the seals. The center of wheel is 3in wide and axle isn't tappered on troy bilt pony model wheels where rusted on.
Parts Used:
-
Norman from RAINIER, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!