Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 12-1663-00-01

12-1663-00-01 Tappan Wall Oven - Overview

Get Parts and Repair Help for 12-1663-00-01

If you know the wall oven repair part you need, you can browse the list of all parts on the 12-1663-00-01, or you can search by name or part description. You can also find your part by where it is located on the 12-1663-00-01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for 12-1663-00-01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 12-1663-00-01

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$30.49

Flat Style Oven Igniter

This is a flat style oven igniter used to light the element in a gas range. When the element in this igniter glows white hot, the gas is released from the safety valves, which ligh...

Order within the next 4 hrs and your part ships today!
$6.64

Light Bulb

This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If the existing bulb is broken in the socket, disconnect the power to the refrigerator and use a pair of needle nose pliers to grip the internal fragments of the bulb to unscrew. Replace with the new bulb and reconnect the power to the refrigerator. These bulbs are sold individually and are a commonly replaced part; consider ordering a spare.

Order within the next 4 hrs and your part ships today!

Door Hinge - Left Side

$30.08

Clock Knob

This is a clock knob for an electric range, oven, or stove. It allows you to adjust the clock and cooking timer. No tools are required for this repair, the knob simply pops on and off the turn shaft. It is recommended to check all knobs on your appliance before ordering. This part is approximately 1/2 inch in diameter, is made of plastic, and is black in color. It is sold individually. This knob is a genuine original manufacturer part.

Order within the next 4 hrs and your part ships today!

Door Hinge - Right Side

$75.85

Door Hinge - Left Side

This hinge is located on the left side of the oven door.

Order within the next 4 hrs and your part ships today!
$59.10

Long Ceramic Igniter Assembly

Order within the next 4 hrs and your part ships today!
$26.32

Top Oven Door Seal

Order within the next 4 hrs and your part ships today!
$4.14

SCREW

Order within the next 4 hrs and your part ships today!
$3.73

Thermostat Bulb Clip

Order within the next 4 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven quit heating.

  • Customer: John from Darlington, SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 506 of 549 people found this instruction helpful
After reading up on the problem of the gas oven not lighting I decided I needed to install a new igniter. I had read where some people just pulled a panel off the back and installed a new one.. yeah, no such luck with this model so I had to crawl into the broiler drawer space [which I had to clean out first]. Note, if you wear trifocal glasses you might as ... read more

Oven was difficult to light, then stopped lighting altogether

  • Customer: Ritchie from Ithaca, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 249 of 330 people found this instruction helpful
1. Turned off circuit breaker to stove
2. Removed the two screws holding down the floor of the oven (screws are at back.), and then lifted it out.
3. Removed the nut holding down the flame guard, and lifted it off.
4. Opened the bottom drawer.
5. Removed the protective cover in the back left of the oven at the bottom, first removing the ... read more

Oven Would Not Heat - Oven Ignitor Failure

  • Customer: Peter from Fife Lake, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 137 of 208 people found this instruction helpful
I first looked up my Model Number on PartSelect.com and looked at the schematic as well as Trouble Shooted my problem.

Reading the posts by others how they Removed, Replaced, and Repaired their Oven Ignitors, I used their helpful info, and of course did mine.

1. Unplugged my Oven/Stove.

2. Removed bottom storage door to ge... read more