Models > 1171WJ-36GK > Instructions

1171WJ-36GK Admiral Range - Instructions

All installation instructions for 1171WJ-36GK parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 1171WJ-36GK
1-5 of 5
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Knobs were worn, panel trim was scratched

  • Customer: jacqueline from falls church VT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
This 'repair' was very straight forward. Just pull the knobs off and install new ones. The panel trim was just as easy.

The parts were received as described.

I have order from here before and will continue to order from them.

Thanks

original light grey color grates stained and unsightly--no amount of scrubbing or cleansers would make them look nice.

  • Customer: Linda from Jenison MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 11 people found this instruction helpful
Opened the box and took out the black color grates~~removed discolored grates and put the new ones on. Looks like a brand new stove and much nicer to look at as it is the first thing you see when you enter the kitchen.

OEM knobs were long gone, control panel trim was worn out

  • Customer: Maggie from Richardson TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
replaced aged, worn out trim panel. installed OEM knobs. Worked beautifully, gave new life to range. Accidentally ordered 4 sets of 5 knobs... not sure how that happened but returned what I did not need. Will definitely order again when tackling the other 100 appliance repair projects in the house.

Panel lettering worn out

  • Customer: Joe from Whittier CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
First I removed the stove on and off knobs and then I lifted the cover and unscrewed 4 screws removed old trim and inserted new trim and screwed in the 4 screws , lower the cover and replaced the knobs.

Replace the slash cover around the control knobs

  • Customer: Henry from Torrance CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
Removed the knobs. Remove the four screws holding the cover and then replced the old cover with the new one. Tightened the four screws and replaced the knobs.
All Instructions for the 1171WJ-36GK
1-5 of 5