Models > 1171WJ 30 > Instructions

1171WJ-30 Admiral Range - Instructions

Installation Instructions for parts on models starting with 1171WJ-30

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

Models starting with 1171WJ-30

All Instructions for models starting with 1171WJ-30
1-7 of 7
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

original light grey color grates stained and unsightly--no amount of scrubbing or cleansers would make them look nice.

  • Customer: Linda from Jenison MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 10 people found this instruction helpful
Opened the box and took out the black color grates~~removed discolored grates and put the new ones on. Looks like a brand new stove and much nicer to look at as it is the first thing you see when you enter the kitchen.

Old range knobs were broken.

  • Customer: Anna from New York NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 2 people found this instruction helpful
Old range knobs were broken. I just pulled them off and pushed on the new knobs.

Cooktop knobs were missing

  • Customer: Melinda from Boise City OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
I simply put the knobs into place--they fit perfectly, and the cooktop is now is working order. Thank you!

My knob cracked and was hard to turn stove top on. I went online and searched your site for a replacement knob. The kit replaced all 4 knobs for a reasonable price. I replaced them myself without any tools. Now my stovetop has a new look and I don't have to fight with the knobs.

  • Customer: Kathleen from Destrehan LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
I pulled off my knobs and put on the new ones from the kit I ordered from you. They were a "D" fitting. I did do a little cleaning before putting the new ones on, but it was really easy.

Igniter Switch on the burner was constantly on

  • Customer: Roman from West Caldwell NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 3 of 8 people found this instruction helpful
To get to the switch I had to remove the knobs and the front panel of the burner valves. There were some dozen screws, top and bottom holding the panel in-place.
The switch slid off the burner valve stem easily but removing the wires I had to pull with the pliers. There seamed not to be a wire release that I could see.
Replacing the wires was no problem. They slid into place by just pushing them in. Assembly was the reverse.

broken gas oven knobs.

  • Customer: Paul from West Pittston PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
recieved knobs fast & put them on in seconds, life is good thank you guys & gals...

missing knobs

  • Customer: Mary Ann from Burlington CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
took old knobs off and replace with new knobs
All Instructions for models starting with 1171WJ-30
1-7 of 7