Models > 11082832100 > Instructions

11082832100 Kenmore Dishwasher - Instructions

All installation instructions for 11082832100 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 11082832100
211-225 of 338
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

right part easy

  • Customer: JOHN from LAUREL MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
self...right part thank you

Felt came loose on lint screen.

  • Customer: mary from enola PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
ILove your service. The part came in 3 days. Best parts service I have ever found. I was told by the dealer it would take 2 weeks to come in.

handle broke off of dryer door.

  • Customer: Daniel from Birmingham AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Followed the repair instructions on your website and was done in less than 10 minutes.

Dryer wad making squeaking noise

  • Customer: Thomas from Spring Grove IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Wrench set
  • 0 of 0 people found this instruction helpful
Thank you for your part service. It saved me about $ 200.00 dollars by Sears not coming out to repair a simple problem.

broken drive belt

  • Customer: Andrew C from West Springfield MA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
after watching the instuctional installation video, it real took about 25 to 30 mins to install the new belt. The video was perfact and made the installation so easy..

Dryer kept shutting off after 10-15minutes

  • Customer: Neal from Bertha MN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Took off front bottom panel reached in removed part that was very dusty. Put in new part. Cleaned out lint inside dryer. Works like a charm.

Dryer quit heating

  • Customer: Jeff from MANCHESTER GA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Was able to change out the Heating element but the dryer still does work....

lint filter housing cracked

  • Customer: Richard from Sanford ME
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
open dyer door replace lint filter perfect fit, good price, fast delvery. thank you

dryer would not get hot on any setting

  • Customer: Betsy from Round Mountain TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
First I replaced the heating element. That did not fix the problem, so I used an ohm meter to test the thermostat and fuse (thermal cut-off). One of those was bad, so I ordered the thermostat/fuse conbo and put those in. The hardest part was getting the wires to the right places. I labeled them with masking tape and a sharpie, but maybe they are sized so they only fit one place. I didn't check. The actual work of changing out the parts was super easy. I recommend testing those three parts-heating element, thermostat, fuse-with an ohm meter before buying something you don't need. I now have a spare heating element and thermostat. I should be good for another ten years!

The dryer was taking longer to dry.

  • Customer: Brett from Billings MT
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
My dryer is one of the energy efficient models (HE). The video for the installations was knowledgeable, but getting into the front of mine only required removing to screws from the bottom left & right corner (not using a putty knife to pop the springs). the plate on the front drops after that. Also when taking out the tube with the dryer element in it took a lot more twisting inside the frame to get it loose. Still turn it after the wire connections have been pulled off a little bit better than 1/4 of a turn. Also the heating element was in there really, really tight. It required tapping on the plate with a screw driver and a rubber hammer to take it out & put in (not that tough). After putting it in a 1/4 of a turn so that the tab was inside the blower tube. everything after that was pretty easy. The video showed this all being done in a clean dryer. It has been my experience that before all is running & closed back up that a vacuum or shop vac needs to go thru there to clean things up & prevent a future fire.

Belt pulley frequently squealed loudly

  • Customer: WILLIAM from HOUSTON TX
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
My way of replacing the pulley was much faster than the parts select video that showed how to replace the belt tension-er pulley. They took off the door, the entire front AND the drum to get to the pulley. I ACCESSED THE PULLEY BY REMOVING THE 4 INCH EXHAUST PIPE, (ONE SCREW) WHICH GAVE MORE THAN ENOUGH OPENING TO REPLACE THE NEARBY PULLEY! I suggest you remake that video

No heat

  • Customer: Richard from Mount. Pocono PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Easy fix. Took the front panel off, removed the heater tunnel by loosinig the two holding screws. Pulled the whole duct out of the machine and swapped out the old parts for the new. Just reverse the removal procedure and done. One thing to do is to check the exhaust duct to make shure it's not clogged. That was the reason my heating element broke.

The leveling foot on my dryer broke.

  • Customer: Diana from Clifton NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
We only had to tilt the dryer enough to be able to screw the leveling leg in place.The only hard part was holding the dryer steady to screw in the leveling foot.

Suspected bad moisture sensors

  • Customer: David from Sussex WI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Opened machine up, removed electric control panel, removed door assembly, removed lint collector assembly, removed and replaced 2 sensor bars then reassembled machine. Ended up not being the problem but, I now have new moisture sensing bars.

screetching noises and rubbing noises

  • Customer: MARK from LEWISVILLE TX
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
The tear down on the dryer was more difficult than the instructions and internet showed due to different models used. The kit was not identical to the original parts but close enough to work (I think). The biggest issue we had was getting the drum back in and placed on the wheels where it would turn easily. Overall the repair came together but it was a bit more involved and we anticipated going into the project. The actual noises were caused by the disintegration of the tensioner wheel which broke and was wobbling on the axel.
All Instructions for the 11082832100
211-225 of 338