11082822102 Kenmore Dryer - Instructions

Watching videos on the internet, I learned how to test the parts of the dryer. I learned that the thermal fuse was the problem. I ordered the part and it arrived in a few days. I changed out the part, put the dryer back together, and it worked! Saved me a great deal of money!

Removed all the screws on the inside of the dryer door, but discovered that some of the screws hold the glass on the inside of the dryer door. Anyway, using a power screwdriver, I replaced the handle in about 15 minutes.

Used #1 Phillips head screwdriver- removed 6 Phillips head screws from inside dryer door, this allows front of door to be separated from glass inside door. Removed 2 screws which retain dryer handle, inserted new handle, re attached door front in reverse order that it was removed. Nothing but a breeze! A 90 year old woman could perform this task without putting on her glasses! Lol!

replaced thermal fuse but the same result running to hot then it will not start after. had decided to reorder thermal fuse, high limit thermostat cycle thermostat. still awaiting parts as of now.

My dryer is a KitchenAid KEYE660W (electric). I tried to start the dryer but it would not run. I did notice that if I held the start button down, I could feel light vibrations through the button. Searched through Yahoo and this site and determined that this is often a bad Thermal Fuse. Used the diagrams on this site to locate where it should be, removed the back of the dryer with a screwdriver, removed the two wires clipped to the Thermal Fuse and unscrewed the Thermal Fuse. I had a friend test the fuse with a Multimeter. It was bad so I ordered another one on this site and it arrived in two days. Screwed the Thermal Fuse back in and clipped the two wires back on. Started the dryer and it worked!!! Replaced the back of the dryer. This repair took 15 minutes MAX and taught me a little bit about Mulitmeters.

Replaced with parts orded worked fine for2 hours and quit heating again

followed the you tube video, came apart ok, very bad lint problem. Vacuummed out extensively. Made repairs, very straight forward. Back together ok, still noisy but not as bad. May be the fan.

I'm a 68 year old single lady who watched the video and just followed the instructions. Took the back off, tested all the parts involved with heating and the only part that didn't have any continuity was the top part of the thermal cutoff fuse. After receiving the part I removed the old one, put the new one in, put the back on and turned the dryer on. It heated right up. I also had a part that I didn't need and your return dept. made it very easy to return. I love this site. Save me a ton of money.

Found this part on your site very EZ bought it you shipped to my door got it when you said it would be here open it installed it propblem over glad i found you guys will use again Very good website Keep up the good work THANK YOU

Order one new latch, receive 2 spares. Pushed new latch in, re oriented the catch. was done in less than 5 min

We did repair by first watching a you tube video, then jumping in an dgoing step by step through the video. While not exactly the same dryer, the steps were in sequence. We thoroughly sleaned out the dryer with the tub out before reassembly. Th eonly slightly tricky part was putting front piece back, but once we mad esure ot align the sides for squareness the dryer went back together smoothly, execpt for one dropped screw. that was fished out through the bottom panel. The dryer runs quietly and we can watch TV with the door open to the laundry room again. I should have done this a long time ago. It started out by sqeaking at startup, then grew worse over time. I recomend anyone with a friend should be able to do this. Now with Cell phone pictures it is even easier to remember where the screw go.

I had a friend repair it for me. He unscrewed the back of the dryer door in order to access the screw holes. He removed the broken part in the area for the screw, unscrewed the bottom of the handle and removed it. The new part fit in perfectly so all he had to do was replace all of the screws. Probably about 10 minutes!

Followed the directions from your vidio,it was a snap.You Guys are the greatest!!!

The handle on my dryer door cracked. I ordered the replacement part from Part Select. It came with lightning speed. I followed the instructions on your website. The door handle installed easily and fit perfectly! Dave

My husband changed the part but part select was very helpful. With their free repair help site it made repairing a breeze! We will use parts select again and again. I did order all the parts we might have needed and only needed one. Now I will return the others.