Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 1106818610 > Parts

1106818610 Kenmore Dryer - Parts

All parts for the Kenmore Dryer 1106818610

Below is a list of all parts for the Kenmore Dryer 1106818610. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 1106818610
1-14 of 102
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.56

Door Catch Kit

This is a door catch kit, and it is designed for use with your dryer. On your appliance you will find both a strike and a catch, these two parts work together to keep your dryer do...

$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part.

$12.47

Rear Drum Support Roller Kit

The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings and one palnut (or retaining wash...

$10.04

Idler Pulley Assembly

This part provides the tension required for a multi-ribbed belt. It also serves to help the belt to rotate the drum and attaches to the idler pulley wheel. If your dryer will not start or tumble, takes too long to dry, or is noisy during operation, you may need to replace the idler pulley assembly. Make sure to disconnect power before installing this part, and work gloves are recommended to protect your hands. While the dryer is disassembled for this repair, consider replacing the drive belt as well. You will need a putty knife, a Phillips screwdriver and a 5/16 nut driver for this repair.

$5.96

Tri Ring

If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found b...

$22.85

Heating Element

The heating element provides heat to your dryer during the drying cycle. If you notice that your dryer is taking too long to dry clothes, or is providing little or no heat, you may need to replace the heating element. This element carries 5200W and 240V. Be sure to disconnect the power to the dryer before completing this repair. Please note, this element no longer includes two terminals and two adapter leads. They must be ordered separately. The leads are OEM part number 279457. The dryer heating element is located in the back of your dryer, so you will need to remove the back panel to access this part.

$24.56

Lint Filter

This filter collects lint as it passes through the dryer vent.

$121.04

Drive Motor with Pulley

This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.

$7.83

Dryer Door Switch Actuator Spring/Lever

This black actuator spring with white rubber tip is used for both dryer doors and washer lids.

$20.20

Wheel, Blower (Includes Illus.

The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance.

$6.19

Lint Trap Housing Seal

This seal comes with the adhesive backing.

$3.02

Cover Screw

Sold individually.

$8.00

Seal, Lint Chute

This seal comes with the adhesive backing.

$51.46

Rear Drum Seal with Adhesive

Includes high temperature adhesive.

All Parts for the 1106818610
1-14 of 102