11067761600 Kenmore Dryer - Instructions

I order the part from you and you had a detail video on how to replace the door switch, and it was on the money, THANK YOU

We thought it wiras the heating element and we ordered that part from.you but it did not fix the dryer. So we ordered the thermal kit and little less then 15 min. we had it fixed.

easy to simple and hope it continues to work.

I'm a 68 year old single lady who watched the video and just followed the instructions. Took the back off, tested all the parts involved with heating and the only part that didn't have any continuity was the top part of the thermal cutoff fuse. After receiving the part I removed the old one, put the new one in, put the back on and turned the dryer on. It heated right up. I also had a part that I didn't need and your return dept. made it very easy to return. I love this site. Save me a ton of money.

Found this part on your site very EZ bought it you shipped to my door got it when you said it would be here open it installed it propblem over glad i found you guys will use again Very good website Keep up the good work THANK YOU

Order one new latch, receive 2 spares. Pushed new latch in, re oriented the catch. was done in less than 5 min

We usedthe instructions that PartsSelect offered. Unscrewed the top in the back of the dryer lifted it up and replaced the part. A Lot cheaper than calling a repairman...

Simple to remove the back cover, two screws holding the timer, unplug wires from old timer, install on the new one. New timer was exact match to the old one.

I am a 75 year old woman who always had servicemen do the repairs that needed to be done in my home. However, living on Social Security I needed to reduce my expenses. I watched the video of how to replace the part and determined I could follow them easily. Within a short time the door switch was installed and the clothes dryer started working at the push of the on button.

Removed front lower panel as shown in how to do video, removed two screws from heating element bracket and pulled the whole tube that holds heating element and thermo cut off and thermostat. Used OHM meter to check out heating element, thermal cut out and thermostat. Thermal cut out was the only thing bad but replaced both thermostats as recommended. The most time was taken cleaning out cabinet as it had eleven years of lint and very lucky it never caught on fire over the years. Put all back together and dryer now dries clothes in half the time as before.

Followed the directions from your vidio,it was a snap.You Guys are the greatest!!!

Remove two screws from lint trap lift top, disconnet wires on front panel. Remove front panel and drum take out two screw from coilvalve remove and replace with new valves.

Easy repair once you locate the problem. The video is really helpful.

wow took less than 15 minutes to change switch watched online video was so easy change thanks lot

ordered a replacement light - took about 5 minutes, hardest part was disconnecting power and getting into the dryer replace light. The second part was replacing the dryer switch. This took a bit longer, but was completed. The plastic locks on the top were a little different than the video, but once I saw how the one worked (one side popped open very easily) the other one just took a bit of nudging and opened easily too. Now that I have done this, I am not afraid of working on it for other issues. Great helpful site. They will have my business for other repairs.