11066752501 Kenmore Dryer - Instructions

following the repair video made it super easy. thanks!

Watching videos on the internet, I learned how to test the parts of the dryer. I learned that the thermal fuse was the problem. I ordered the part and it arrived in a few days. I changed out the part, put the dryer back together, and it worked! Saved me a great deal of money!

Shipping from this site was quick. Use a 1/4" nutdriver to remove the sheet metal screws securing the back panel of the dryer. Removal of the element is easy once you look closely at the fastening system used. Have a vacuum hose handy to remove all lint while you have the back off.

took apart-got part # alled company they shipped part in 3 working days and it took maybe 15 minutes to put back together. easy job, fast part sewrvice very pleased happy wife.

replaced thermal fuse but the same result running to hot then it will not start after. had decided to reorder thermal fuse, high limit thermostat cycle thermostat. still awaiting parts as of now.

the video was very helpful

My dryer is a KitchenAid KEYE660W (electric). I tried to start the dryer but it would not run. I did notice that if I held the start button down, I could feel light vibrations through the button. Searched through Yahoo and this site and determined that this is often a bad Thermal Fuse. Used the diagrams on this site to locate where it should be, removed the back of the dryer with a screwdriver, removed the two wires clipped to the Thermal Fuse and unscrewed the Thermal Fuse. I had a friend test the fuse with a Multimeter. It was bad so I ordered another one on this site and it arrived in two days. Screwed the Thermal Fuse back in and clipped the two wires back on. Started the dryer and it worked!!! Replaced the back of the dryer. This repair took 15 minutes MAX and taught me a little bit about Mulitmeters.

The part was delivered when promised. Part was a perfect fit. I was very pleased with the entire process.

Watched how-to video provided on PartSelect website. Most time was spent cleaning out the cabinet of lint and other debris. I found over 5 bucks in loose change! I Found pulling the belt over the motor pulley to be the trickiest. Note: my dryer will be 30 years old come this September. I wonder how many more years I'll get out of it!

I followed the repair instructions that you had on line. Thank you

I consulted the internet and found Part Select and use online repairman to diagnose the problem and found the roller solution with the parts, video and parts illustration. Sure enough, the left roller hole was worn and egg shaped. I ordered the parts on a Wednesday afternoon. While I waited, I got all the lint from the bottom pan, motor, and around the burner cleaned out and ready for the new parts. The parts arrived Friday morning and I installed them and put the dryer back together before noon. The dryer works and sounds like a new machine. Now I am ready to attack the squeaky fan motor in the freezer compartment of our refrig.

took unit apart looked for any part that looked out of place or damaged. found that heating element had a break in it. went on line found PART SELECT site entered my info (they made it real easy to do) and there was the part i needed was okay with price. part delivered 3-4days (week-end included) installed part dryer now works. sure beat having to buy new dryer especially right now. now we just have to get caught up on laundry. i most highly recommend PART SELECT to the pro or the do it yourself person. thanks, paul..

I order the part from you and you had a detail video on how to replace the door switch, and it was on the money, THANK YOU

video describing repair very helpful. just folling it made the repair easy

Replaced the heating element, simple enough. Hardest part was getting the solid metal exhaust pipe back on and through wall!