11066101691 Kenmore Dryer - Instructions

video describing repair very helpful. just folling it made the repair easy

Replaced the heating element, simple enough. Hardest part was getting the solid metal exhaust pipe back on and through wall!

replaced stock belt tensioner with one with pulley. i hope that solves my problem. just want to add that you guys saved me a ton of money ! thanks and God Bless

We started with replacing a thermal fuse, went onto heating element & then to replacing the high limit thermostat. The replacements went very easily with your videos, but unfortunately it did not do the job & there is still no heat.

I'm a 68 year old single lady who watched the video and just followed the instructions. Took the back off, tested all the parts involved with heating and the only part that didn't have any continuity was the top part of the thermal cutoff fuse. After receiving the part I removed the old one, put the new one in, put the back on and turned the dryer on. It heated right up. I also had a part that I didn't need and your return dept. made it very easy to return. I love this site. Save me a ton of money.

I watched a video on youtube about how to install a dryer heaing element, took pictures of the wires on my cell phone, then just installed the new part. Plugged it back in and works like a charm!

Very easy to repair the heating element. I took the back off and half of it was burnt out (twice as long to dry). Replaced it and works like new. The instructional videos are great. I've replaced my water pump on my dishwasher also. Once again, instructional videos are great. I put trust in this website and their parts. I wouldn't have any worries about this site. Overall satisfaction A+.

Order one new latch, receive 2 spares. Pushed new latch in, re oriented the catch. was done in less than 5 min

Unscrewed the back panel. Unscrewed the heating element, disconnect the wires. Connect the wires to the new heating element and screw it back in place. Pull the thermal fuse off disconnect the wires from the old one and connect to the new one, then push back in place. Screw the back panel back in place. Put clothes in the dryer and start using. The dryer was back in use within 20 minutes after the parts arrived.

By following the repair video available, I took off the top and front panel of my dryer, removed the drum, removed the old drum support rollers, vacuumed out the inside of the dryer (so much lint!), replaced the drum support rollers, and put the dryer back together. Dryer runs like brand new and is very quiet. Repair was extremely easy to do. Got the replacement parts in about 2 business days. PartSelect repair videos make the repair easy too! Lots of satisfaction for a girl to repair her own dryer!

Can't stop laughing about the mistake I almost made, before I even looked on internet I called Sears and scheduled a repair appointment, $80.00 just to have someone come out and tell me what my problem was not to repair it but to tell me whats wrong. And I told them the belt had broken I heard it when it snapped. Long story short version I found your website and entered appliance information, found part for $15.00 but also found on-site video clearly making the needed repair. Clear step by step instructions taking only 8 minutes looked very easy so I took a chance ordered the part two days later part arrived so I went into basement armed with laptop and tools. MAN it was easy.... too easy ....worked out fine video was spot on. Thanks you guys are a great company

I removed the tiny screws on the door and replaced the old door catcher with the new one.

Turned dryer around and removed electrical leads to heat element and tested element for continuity. No ohms resistance registered - removed cover and heat element and found broken element winding. Replaced with new winding from PartSelect. Savings of at least $150 - $200 vs professional repairman.

Using a Nutdriver, took all screws off from back panel. Located heat element, took 2 more screws off. Taking 1 wire off at a time, just to make sure they went back on right. Finished with the wires. Replaced element, then put back on. Plug dryer back in. That easy!!! Now I'm back in business. Very easy. Thank You.

My husband changed the part but part select was very helpful. With their free repair help site it made repairing a breeze! We will use parts select again and again. I did order all the parts we might have needed and only needed one. Now I will return the others.