11063932100 Kenmore Dryer - Instructions

My husband took the back off the dryer and the Thermostate fell apart in his hands. So detecting the problem was easy. Ordered a new thermostat it arrived in 2 days. Tok him 30 minutes to install and get dryer put back together. Works better than it had been.

Pretty easy to fix, hardest part was having to get the screws out of the inside of the dryer to replace the sensor itself. Once that was done it was pretty quick! PLUS super fast shipping on my part!! Was fixed before any repair places even called me back!!

It snapped right in. Works perfect.

poped off front bottom panel just a couple screws to take loose slid out the heat element saved 172.00 dollers

I took the old filter out and placed the new one in the same spot.

Had to unstack the unit took it apart and replace the rollers,Belt and Idler Pulley It was the pulley making the noise but I had it a part and for the cost I replace the rollers and the Belt the Job was easy The Washer and Dryer are Great we run about 2 Loads a Day

I watched the video and after that made the repair, it was very easy and the video was a really big help. From start to finish it took me no longer than 10 minutes.

After removing the back & top of the dryer,I determined the noise was coming the idler pulley.I went online w/ model # & found Partselect.com.I ordered the dryer repair kit (at my door in 3 days) which included all the rollers,idler pulley, belt & hardware.It was an easy job to do even tho instructions were for top control panel model (mine is a whirlpool duet- front control) I did try using silicone lubricant on idler pulley, which worked to quiet dryer for a couple days so my wife could use it while I was waing for parts.Two thumbs up to Partselect.com,I will be purchasing all my appliance repair parts from them..I own all whirlpool stainless steel appliances that have been very reliable,but it's nice to know I have Partselect to fix problems as needed.

My experience was a positive one. I called the company and read the part number from kitchen aid and the technician on the other line knew exactly what i needed. He gave me the part number and the price and took care of my order. Within 3-5 days i received my part. I am really happy with this company and i will call again when one of my applicances is not working.

self...right part thank you

ILove your service. The part came in 3 days. Best parts service I have ever found. I was told by the dealer it would take 2 weeks to come in.

Thank you for your part service. It saved me about $ 200.00 dollars by Sears not coming out to repair a simple problem.

I followed the video for this part. Opened the front panel. Unscrewed the brace on the bottom. Turned the element housing and pulled out after disconnecting the wire leads. Unscrewed the original parts. Screwed in the new parts. Reversed the sequence and ran a load of towels. It was easy and fixed the problem.

I studied the instruction on the partselect.com site, followed the directions to discover the problem, ordered the part from them, installed it as in instructed in their video, and it has worked perfectly for the past 5 days after doing a mountain of laundry. I took the opportunity to clean my dryer interior from all lint and dust as well as the vent. I suspect lint is what caused the problem after I washed some new flannel sheets which clogged my vent cover outside. I cannot say enough good things about the partselect videos. I'm ready to tackle a few other appliances. One note about the Kenmore Elite Dryer 110 model: Do not take the back off. I removed the screws which caused the steel plate to drop a little at the back of the dryer. Then I could not put the screws back in. To fix this, I removed the screws from the control panel and pushed it forward to reach just inside the top back of the dryer...pulled up the steel plate and got the screws to line up and put it all back together. The only other tricky part was getting the heater unit back in to the slot at the back of the dryer. I finally used a little brute force to push it in far enough, then turned it a quarter clockwise to the correct position. My husband was impressed that I tackled this project by myself. Hunting season was on in MN. THANK YOU PartSelect.

Took off front bottom panel reached in removed part that was very dusty. Put in new part. Cleaned out lint inside dryer. Works like a charm.