11063046100 Kenmore Dryer - Instructions

More time troubleshooting than repairing. Used online help for narrowing down problem to the thermal cut-off unit. Had to remove front lower cover, remove wire sets from heating element,remove element from dryer. Then it was a simple swap out of the two relays/thermistors, and put it all back together again. Unit worked as designed after repair.

Removed the bottom front panel. The difficulty was in locating and testing the components because of access. Removing the heater required removing the heat shield and bracket and restraining screws, and then pulling out the heater with pliers which was stuck because of age. Dryer now works fine.

I ordered the part with the manf. # BUT upon installation I found that the new part was slightly different than the old part therefore not allowing me to screw the new part to the inside of the dryer - I was able to find longer screws that would work but took me an hour to figure out what the issue was and then resolve the matter

My husband took the back off the dryer and the Thermostate fell apart in his hands. So detecting the problem was easy. Ordered a new thermostat it arrived in 2 days. Tok him 30 minutes to install and get dryer put back together. Works better than it had been.

It snapped right in. Works perfect.

poped off front bottom panel just a couple screws to take loose slid out the heat element saved 172.00 dollers

I took the old filter out and placed the new one in the same spot.

I watched the video and after that made the repair, it was very easy and the video was a really big help. From start to finish it took me no longer than 10 minutes.

My experience was a positive one. I called the company and read the part number from kitchen aid and the technician on the other line knew exactly what i needed. He gave me the part number and the price and took care of my order. Within 3-5 days i received my part. I am really happy with this company and i will call again when one of my applicances is not working.

self...right part thank you

ILove your service. The part came in 3 days. Best parts service I have ever found. I was told by the dealer it would take 2 weeks to come in.

Thank you for your part service. It saved me about $ 200.00 dollars by Sears not coming out to repair a simple problem.

after watching the instuctional installation video, it real took about 25 to 30 mins to install the new belt. The video was perfact and made the installation so easy..

I followed the video for this part. Opened the front panel. Unscrewed the brace on the bottom. Turned the element housing and pulled out after disconnecting the wire leads. Unscrewed the original parts. Screwed in the new parts. Reversed the sequence and ran a load of towels. It was easy and fixed the problem.

I studied the instruction on the partselect.com site, followed the directions to discover the problem, ordered the part from them, installed it as in instructed in their video, and it has worked perfectly for the past 5 days after doing a mountain of laundry. I took the opportunity to clean my dryer interior from all lint and dust as well as the vent. I suspect lint is what caused the problem after I washed some new flannel sheets which clogged my vent cover outside. I cannot say enough good things about the partselect videos. I'm ready to tackle a few other appliances. One note about the Kenmore Elite Dryer 110 model: Do not take the back off. I removed the screws which caused the steel plate to drop a little at the back of the dryer. Then I could not put the screws back in. To fix this, I removed the screws from the control panel and pushed it forward to reach just inside the top back of the dryer...pulled up the steel plate and got the screws to line up and put it all back together. The only other tricky part was getting the heater unit back in to the slot at the back of the dryer. I finally used a little brute force to push it in far enough, then turned it a quarter clockwise to the correct position. My husband was impressed that I tackled this project by myself. Hunting season was on in MN. THANK YOU PartSelect.