11062724101 Kenmore Dryer - Instructions

After getting the parts I remove the flex pipe then remove the back cover of the Dryer, then I discover a bird in the exhaust flex pipe and another one stock in the blower fan. The Birds was preventing the air from escaping from within the dryer and as a result we were getting a lot of steam build up inside the dryer. Once I removed the birds I went ahead and replace the parts anyway and the dryer has been working fine ever since. Replace the flex line. (The old parts are still good.)

Neither of these parts solved my problem. I ordered the cycling thermostat and the regular thermostat (2 pieces) and installed them quickly last night. Problem solved! The video was awesome and made the repair straight-forward and easy. Thanks for your wonderful, information packed site. Saved me from buying a new dryer and spending unnecessary repairman fees.

My dryer stopped heating up and therefore not drying clothes. I looked on you tube and watched different videos by Part Select and decided I would try replacing the heating element. I ordered the heating element online with Part Select after searching online for the best price. Part select website was easy to use. Received the part in a few days and was able to replace it with a few tools that I had in my home. I watched the you tube video again and referred to it while I worked. I completed the job in about 30 minutes. I am a 58 year old woman, and part select saved me a lot of worry, money and trouble. I'm thrilled and will turn to Part Select for any and all appliance repairs before I call a repairman into my home. Thank you Part Select!!!!!

I assumed a fuse was bad, although there were 3 possible fuses that might have caused the problem. I tested the Thermal Fuse #PS345113 and it was shot...the others were ok. I ordered a new fuse and everything works fine. The timer was not working on only the heated cycles but the new fuse fixed that as well. This took a bit longer than it should have because it included a lot of cleanup and moving an adjacent washing machine as well.

I went out on a limb and checked the heating element. I removed the back panel removed the heating element and ordered a new part from your website. When I received your product I installed it the same way I had removed the old one. Piece of cake. Knock on Wood my dryer runs fine. Hopefully that was the problem. If not I will be revisiting your website to purchase whatever else I need. Thanks......

following the repair video made it super easy. thanks!

Watching videos on the internet, I learned how to test the parts of the dryer. I learned that the thermal fuse was the problem. I ordered the part and it arrived in a few days. I changed out the part, put the dryer back together, and it worked! Saved me a great deal of money!

Shipping from this site was quick. Use a 1/4" nutdriver to remove the sheet metal screws securing the back panel of the dryer. Removal of the element is easy once you look closely at the fastening system used. Have a vacuum hose handy to remove all lint while you have the back off.

took apart-got part # alled company they shipped part in 3 working days and it took maybe 15 minutes to put back together. easy job, fast part sewrvice very pleased happy wife.

replaced thermal fuse but the same result running to hot then it will not start after. had decided to reorder thermal fuse, high limit thermostat cycle thermostat. still awaiting parts as of now.

the video was very helpful

My dryer is a KitchenAid KEYE660W (electric). I tried to start the dryer but it would not run. I did notice that if I held the start button down, I could feel light vibrations through the button. Searched through Yahoo and this site and determined that this is often a bad Thermal Fuse. Used the diagrams on this site to locate where it should be, removed the back of the dryer with a screwdriver, removed the two wires clipped to the Thermal Fuse and unscrewed the Thermal Fuse. I had a friend test the fuse with a Multimeter. It was bad so I ordered another one on this site and it arrived in two days. Screwed the Thermal Fuse back in and clipped the two wires back on. Started the dryer and it worked!!! Replaced the back of the dryer. This repair took 15 minutes MAX and taught me a little bit about Mulitmeters.

The part was delivered when promised. Part was a perfect fit. I was very pleased with the entire process.

Watched how-to video provided on PartSelect website. Most time was spent cleaning out the cabinet of lint and other debris. I found over 5 bucks in loose change! I Found pulling the belt over the motor pulley to be the trickiest. Note: my dryer will be 30 years old come this September. I wonder how many more years I'll get out of it!

I followed the repair instructions that you had on line. Thank you