Models > 11062702100 > Instructions

11062702100 Kenmore Dryer - Instructions

All Instructions for the 11062702100
1741 - 1755 of 2160
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
dryer wasn't heating
I watched a video on youtube about how to install a dryer heaing element, took pictures of the wires on my cell phone, then just installed the new part. Plugged it back in and works like a charm!
Parts Used:
Heating Element - 240V 5400W
  • Denise from Maryville, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Took two cycles to dry
Very easy to repair the heating element. I took the back off and half of it was burnt out (twice as long to dry). Replaced it and works like new. The instructional videos are great. I've replaced my water pump on my dishwasher also. Once again, instructional videos are great. I put trust in this website and their parts. I wouldn't have any worries about this site. Overall satisfaction A+.
Parts Used:
Dryer Thermal Fuse Heating Element - 240V 5400W
  • Jason from North Little Rock, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
latch inside door popped out
Order one new latch, receive 2 spares. Pushed new latch in, re oriented the catch. was done in less than 5 min
Parts Used:
Door Catch Kit
  • zachery from snoqualmie, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The door Switich on our dryer had broke, and we were using something to push the broken swich enough to get the dryer going. We could not find the piece we needed so I went to PartSelect and it was so easy finding what I needed I put in the Model number and looked and there it was. I called and ode
We usedthe instructions that PartsSelect offered. Unscrewed the top in the back of the dryer lifted it up and replaced the part. A Lot cheaper than calling a repairman...
Parts Used:
Dryer Door Switch
  • Rebecca from Hartsville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No heat
Unscrewed the back panel. Unscrewed the heating element, disconnect the wires. Connect the wires to the new heating element and screw it back in place. Pull the thermal fuse off disconnect the wires from the old one and connect to the new one, then push back in place. Screw the back panel back in place. Put clothes in the dryer and start using. The dryer was back in use within 20 minutes after the parts arrived.
Parts Used:
Dryer Thermal Fuse Heating Element - 240V 5400W
  • Erin from Newfane, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Dryer made loud noise, shook across the floor
By following the repair video available, I took off the top and front panel of my dryer, removed the drum, removed the old drum support rollers, vacuumed out the inside of the dryer (so much lint!), replaced the drum support rollers, and put the dryer back together. Dryer runs like brand new and is very quiet. Repair was extremely easy to do. Got the replacement parts in about 2 business days. PartSelect repair videos make the repair easy too! Lots of satisfaction for a girl to repair her own dryer!
Parts Used:
Rear Drum Support Roller Kit
  • Miranda from Scottsville, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Broken Dryer belt
Can't stop laughing about the mistake I almost made, before I even looked on internet I called Sears and scheduled a repair appointment, $80.00 just to have someone come out and tell me what my problem was not to repair it but to tell me whats wrong. And I told them the belt had broken I heard it when it snapped. Long story short version I found your website and entered appliance information, found part for $15.00 but also found on-site video clearly making the needed repair. Clear step by step instructions taking only 8 minutes looked very easy so I took a chance ordered the part two days later part arrived so I went into basement armed with laptop and tools. MAN it was easy.... too easy ....worked out fine video was spot on. Thanks you guys are a great company
Parts Used:
Multi Rib Belt - 92-1/4"
  • Leon J Swain from Washington, DC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No Heat
Replaced a fuse but no heat yet. Ordered new heating element, thermal Cut-off kit and Cycling Thermostat and installed those items and dryer is working like new
Parts Used:
Dryer Cycling Thermostat Heating Element - 240V 5400W Thermal Cut-Off Kit
  • geisbert from Huntington Woods, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Door catcher on dryer wore out
I removed the tiny screws on the door and replaced the old door catcher with the new one.
Parts Used:
Door Catch
  • Bianca from New Orleans, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken clothes dryer door switch
I am a 75 year old woman who always had servicemen do the repairs that needed to be done in my home. However, living on Social Security I needed to reduce my expenses. I watched the video of how to replace the part and determined I could follow them easily. Within a short time the door switch was installed and the clothes dryer started working at the push of the on button.
Parts Used:
Dryer Door Switch
  • Rose from Waxahachie, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
everything fully functional but no heat.
Turned dryer around and removed electrical leads to heat element and tested element for continuity. No ohms resistance registered - removed cover and heat element and found broken element winding. Replaced with new winding from PartSelect. Savings of at least $150 - $200 vs professional repairman.
Parts Used:
Heating Element - 240V 5400W
  • Kurt D from Grove, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
no heat
Remove two screws from lint trap lift top, disconnet wires on front panel. Remove front panel and drum take out two screw from coilvalve remove and replace with new valves.
Parts Used:
Dryer Cycling Thermostat
  • David from Santa Maria, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Changing door switch
Easy repair once you locate the problem. The video is really helpful.
Parts Used:
Dryer Door Switch
  • Joan from Biscayne Park, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Heating element went out.
Using a Nutdriver, took all screws off from back panel. Located heat element, took 2 more screws off. Taking 1 wire off at a time, just to make sure they went back on right. Finished with the wires. Replaced element, then put back on. Plug dryer back in. That easy!!! Now I'm back in business. Very easy. Thank You.
Parts Used:
Heating Element - 240V 5400W
  • Doreen from Helena, MT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
dryer would run when you open door
wow took less than 15 minutes to change switch watched online video was so easy change thanks lot
Parts Used:
Dryer Door Switch
  • jose from miami, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 11062702100
1741 - 1755 of 2160