Models > 11062082100 > Parts

11062082100 Kenmore Dryer - Parts

All parts for the Kenmore Dryer 11062082100

Below is a list of all parts for the Kenmore Dryer 11062082100. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 11062082100
15-28 of 139
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


This screw is sold individually.



This screw is sold individually.


Thermostat - 250F

With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to...


Cover Screw

Sold individually.


Dryer Drum Seal with Adhesive

This part seals the drum to prevents air from escaping. This includes silicone rubber adhesive.


Dryer Door Switch Actuator Spring/Lever

This black actuator spring with white rubber tip is used for both dryer doors and washer lids.


Touch-Up Paint - White



Drum Support Roller Shaft - Left Hand Threads

Sold individually.


Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.


Single Access Panel Spring Retainer/Clip

Sold Individually.


Outlet Screen Door Grille

Top cover for lint filter.


Blower Wheel

The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over time. But if it's noisy, it may simply be clogged with lint. Clean the blower and test to see if the dryer is still noisy. If it is, you probably need to replace it.


Leveling Leg Locking Nut

This nut is sold individually. Size: 3/8-16


Terminal Block - Block Only

This part is an electrical connector where you can attach wires. This part does NOT included the wires, screws, and nuts. Must be order separately

All Parts for the 11062082100
15-28 of 139