Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 11062062100 > Parts

11062062100 Kenmore Dryer - Parts

All parts for the Kenmore Dryer 11062062100

Below is a list of all parts for the Kenmore Dryer 11062062100. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 11062062100
15-28 of 139
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.39

Electrode, Sensor

$7.83

Dryer Door Switch Actuator Spring/Lever

This black actuator spring with white rubber tip is used for both dryer doors and washer lids.

$32.12

Dryer Drum Seal with Adhesive

This drum seal with a silicone rubber adhesive is used in dryers. This part seals the drum to make sure air does not escape from the dryer. If your dryer is making loud noises, is ...

$3.02

Cover Screw

Sold individually.

$19.19

Lid Switch

This 3 prong lid switch is used for washing machines that do not have a tub light.

$34.09

Thermostat 250 F (122 C)

With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to 190 degrees Fahrenheit. Differential of 60 degrees.

$6.18

Screw, 10-16 x 1

This screw is sold individually.

$37.64

Wheel, Blower

The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over time. But if it's noisy, it may simply be clogged with lint. Clean the blower and test to see if the dryer is still noisy. If it is, you probably need to replace it.

$26.62

Drum Support Shaft - Left Hand Threads

This shaft is for the front with left hand thread. Sold individually.

$3.02

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$34.58

Motor Pulley

$27.00

Drum Roller Shaft - Right Hand Threads

This front shaft with right hand threads is used in dryers. The shaft and the drum support rollers ride on to support the drum. If your shaft has flat spots and the rollers do not spin, replacing the shaft can solve the problem. The tools needed for this repair are: 5/16 inch socket or nut driver, 1/4 inch socket or nut driver, small flathead screw driver, channel-lock pliers, 9/16 inch socket. Remember to unplug your appliance from the power source before beginning this installation project. Refer to the diagram provided by the manufacturer for further installation instructions.

$6.12

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...

$4.63

Single Access Panel Spring Retainer/Clip

Sold Individually.

All Parts for the 11062062100
15-28 of 139