Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 11060902990 > Parts

11060902990 Kenmore Dryer - Parts

All parts for the Kenmore Dryer 11060902990

Below is a list of all parts for the Kenmore Dryer 11060902990. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 11060902990
29-42 of 159
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.63

Single Access Panel Spring Retainer/Clip

Sold Individually.

$4.79

Washer, Support

This part is located on the drum roller support shaft in your dryer appliance. The exterior of the washer is 1 inch in diameter with a hole in the middle and is made of metal. They are installed alongside the drum support rollers and idler pulleys. If you notice that your dryer is making an unusual sound it could be due to the washer becoming loose on the drum support. They help prevent the rollers and pulleys from bumping up against the brackets they are installed on. If you are replacing the rollers, we suggest you replace the washers at the same time.

$3.02

Leveling Leg Locking Nut

This nut is sold individually. Size: 3/8-16

$161.15

Drive Motor with Threaded Shaft - 120V 60Hz

The blower shaft is 1-5/8 inches long, while the drive shaft is 1-1/4 inches long.

$14.79

Terminal Block - Block Only

This part is an electrical connector where you can attach wires. This part does NOT included the wires, screws, and nuts. Must be order separately

$7.11

Blower Housing Seal

This part seals between the blower housing and the blower housing cover.

$4.42

Control Panel Hinge

Sold individually.

$3.02

Screw

This screw is sold individually.

$114.52

Timer

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$28.31

Door Switch and Actuator Kit

This part recognizes whether the door is open or closed.

$18.74

Terminal Block Screw Kit

This kit includes 3 screws and 3 nuts.

$3.02

Retainer-Idler 1/4-20 x 1/16

Sold individually.

$5.36

Seal, Outlet Housing

This lint chute seal, also known as a seal for outlet housing, is used for dryers. This part seals the lint chute to the blower housing in a dryer. It prevents air from leaking around the filter housing. If your seal is broken, damaged, or overused, it can allow lint to bypass the lint filter. In this case, replacing the seal can possibly solve the issues. The tool needed for this repair is a Phillips screwdriver. Refer to the manual provided by the manufacturer for further installation instructions and remember to unplug your dryer from the power source before beginning this repair project.

All Parts for the 11060902990
29-42 of 159