Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
Below is a list of all parts for the Kenmore Dryer 11060902990. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This black actuator spring with white rubber tip is used for both dryer doors and washer lids.
This two and a half inch long lid switch is used for washing machines that do not have a tub light.
With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 250 degrees Fahrenheit. The element will kick back in when the temperature drops to 190 degrees Fahrenheit. Differential of 60 degrees.
This screw is sold individually.
This metallic screw is less than an inch long and comes with a plastic washer.
This part is used to start the dryer once you have selected a setting on the timer.
This part seals the drum to prevents air from escaping. This includes silicone rubber adhesive.
This shaft is for the front with left hand thread. Sold individually.
This part is an electrical connector where you can attach wires. This part does NOT included the wires, screws, and nuts. Must be order separately
The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic...
This thermostat has an internal heater L155-25F. This thermostat controls the internal drying temperature.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.