This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This is a shift actuator, and is designed for use in washing machines. This shift actuator is made to change the mode of the motor between spin and agitate, as well as communicate with the control boa...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This genuine OEM drain pump is designed for washing machines. It is responsible for removing the wastewater from the machine during the drain cycle. The drain pump works by creating suction to draw wa...
The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Washing Machine Drain Hose Extension Kit *4 foot - includes hose, 2 clamps and hose connector.
$56.39
In Stock
Questions And Answers for 1105142510
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
RHONDA
May 12, 2023
I have got the bolt out but cannot remove rest of agitator
For model number 1105142510
Hi Rhonda, thank you for reaching out. As you have already removed the bolt, remove the agitator by pulling it up from the bottom of the agitator. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Winslwi
April 19, 2024
What part do i need for “stuck on sensing”
For model number 1105142510
Hi Winslwi, thank you for reaching out. We would suggest checking the door lock first. If it is fine, the issue could be with the control board, part number PS12347163. It manages the washer's functions such as filling, washing, draining and spinning. You may need to replace it to fix the issue. We hope this solves your problem!
is this the correct number for the latch to lock the machine for the spin cycle?
For model number 1105142510
Hello Melvina, We are glad you asked! The correct part is Washing Machine Door Lock Assembly PS12704713. We have a video of how to replace it on our site. We look forward to hearing from you.
Hi Fred, thank you for asking. We would recommend checking the electronic control board, part number PS12347163, to fix the issue. We hope this solves your problem!
Bangs when the washer is spinning. Leveled the washer still happening.
Help
For model number 1105142510
Hi Dave, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the suspension rods, part number PS11703290, which might be worn out or damaged and cause the washer to go out of balance, resulting in a loud noise. If any of the suspension rods are damaged, you may need to replace them. We hope this solves your problem!
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch
... Read moreand put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.