Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 11047532602

11047532602 Kenmore Washer - Overview

Get Parts and Repair Help for 11047532602

If you know the washer repair part you need, you can browse the list of all parts on the 11047532602, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for 11047532602 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.20

Touch-Up Paint - White

18ml

$11.07

Spray Paint - 12 oz. - White

$20.85

Shipping Bolt Set

$16.89

HOSE

$39.60

SPRING

$27.40

SCREW-KIT

$4.89

BALL

$22.94

Spray Paint Flo-Coat - Gray - 12 ounces

Can be used to re-coat dryer drums.

$12.41

Cap, Lock Foot

CLAMP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

F 21 error

  • Customer: Andrew from St.Louis, MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 198 of 225 people found this instruction helpful
Removed the front panel unplugged
The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in. read more

Water leak from bottom of door.

  • Customer: Marty from Belfair, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 144 of 164 people found this instruction helpful
I discovered water leaking from the bottom of the door on our Kenmore front load washer. I did a little self diagnosis from the internet and found that this seems to be a common problem for front load Kenmore washers and that the ususal suspect is the large rubbery bellows. I examined the bellows on my washer and although I didn't find anything wrong with ... read more

Door latch module was defective

  • Customer: Carlton from Greer, SC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 69 of 79 people found this instruction helpful
This model is a front-loading washer. The spring loaded retainer for the front of the boot must be removed, then the boot can moved to the side exposing the module. Remove the two screws holding the model, pull the model out, remove the three electrical plugs, then reverse this procedure to install new module. read more