Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 11046462501

11046462501 Kenmore Washer - Overview

Get Parts and Repair Help for 11046462501

If you know the washer repair part you need, you can browse the list of all parts on the 11046462501, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for 11046462501 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$118.88

Drain Pump - 120V 60Hz

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. It has two ports for water to pass through: ...

Order within the next 11 hrs and your part ships today!
$125.82

Bellow - Gray

Also known as a door boot seal.This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately from the door during the spin cycle.

Order within the next 11 hrs and your part ships today!
$2.81

Foot, Front - Single

The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a ru...

Order within the next 11 hrs and your part ships today!
$3.02

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

Order within the next 11 hrs and your part ships today!
$22.07

Hose, Tub to Pump

Order within the next 11 hrs and your part ships today!
$64.05

Water Inlet Valve

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature or amount of water needed.

Order within the next 11 hrs and your part ships today!
$9.76

INLET HOSE

This hose can handle hot or cold water and is five feet long.

Order within the next 11 hrs and your part ships today!
$3.02

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

Order within the next 11 hrs and your part ships today!
$28.68

Drive Belt

Order within the next 11 hrs and your part ships today!
$13.51

Clamp, Bellow To Tub

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

F 21 error

  • Customer: Andrew from St.Louis, MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 278 of 312 people found this instruction helpful
Removed the front panel unplugged
The washer drained water out, lift the washer up to un screw the drain pump. Then unhooked the hoses from pump put the other pump in. read more

Water leak from bottom of door.

  • Customer: Marty from Belfair, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 170 of 190 people found this instruction helpful
I discovered water leaking from the bottom of the door on our Kenmore front load washer. I did a little self diagnosis from the internet and found that this seems to be a common problem for front load Kenmore washers and that the ususal suspect is the large rubbery bellows. I examined the bellows on my washer and although I didn't find anything wrong with ... read more

Door latch module was defective

  • Customer: Carlton from Greer, SC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 78 of 92 people found this instruction helpful
This model is a front-loading washer. The spring loaded retainer for the front of the boot must be removed, then the boot can moved to the side exposing the module. Remove the two screws holding the model, pull the model out, remove the three electrical plugs, then reverse this procedure to install new module. read more