Models > 11042822201 > Instructions

11042822201 Kenmore Dishwasher - Instructions

All installation instructions for 11042822201 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 11042822201
106-120 of 160
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

leaky water inlet valve

  • Customer: Alan from Arlington WA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 0 of 0 people found this instruction helpful
It was an easy fix,all I had to do was pull the washing machine out and remove the top off the washer,leaving everything connected,I cycled the machine to figure out where the leak was in the first place,then unpluged the washer,turned off the water and removed the water lines from the back of the washer(be sure to have a couple towels handy)disconnected the 4 color coded wires from the inlet valve making note of which color went to which relay,disconnected the hose from the inlet valve,and removed the one screw holding he valve to washer.That was all,then reversed the procedure to put it all back together. success! took about 20 min start to finish.

Replacing washer gasket/bellow on front-loader

  • Customer: Paul from Bethesda MD
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Could not have been easier. Have spent more time building kids' Star Wars Lego than this took...

Was missing a baffle in the dryer drum.

  • Customer: Craig from Port Orchard WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Researched the instructions on Partselect website. Followed them to the letter. When the parts arrived, I had them in, the machine reassembled and running in 10 minutes or less. Very simple and straightforward.

No start Flashing Light

  • Customer: Tammy from Maplewood NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
This took ten minutes .... super easy .... DO IT YOURSELF!!!! About 75.00 with shipping ... can only imagine this woulkd have been 250 to 300 to have somebody com e onsite.

Water came into washer when shut off.

  • Customer: Donald from Lake Crystal MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Removed 3 screws from back to remove top. Then 1 screw to release the valve from the back. Take off hose spring clamp remove hose, then do it all in reverse oder. It was a snap.

Wasn't draining

  • Customer: Billie from Dixie WV
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Washed three loads and it was ok but then it stopped draining again. I don't know what to do.

part did not fit properly

  • Customer: VONCEIL from MERRITT ISLAND FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
The replacemnt inlet valve was a little shorter than the original. I had to lenghten the slot on the back of the washer to get the mounting screw in the hole to attach the valve. There is only one mounting screw, so this was an important part of the replacement.

Not draining, code FO2

  • Customer: Monica from Las Cruces, NM
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
Unplug the power first.If you can lean the washer bank and support it with something underneath to make it easier to work on.Removed the 3 bolts at the bottom panel underneath the front door. Pump is right there in front. Unplug the power connection first,you can also remove the wiring that is right in front of the pump so it will be out of the way. remove the pump from it mounting grommets and pull it out a Little so you can get to the hoses at the back of the pump. Using pliers to pull of the hose clamps you can pull off the hoses. Now you can remove the pump out. Do everything in reverse and that's it. I found it to be easier than I thought and took less then 20 mins.

Water smells bad if washer sits for a few days.

  • Customer: Thomas from Troy MI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I replaced the pump thinking this was the most likely cause of the problem. The pump is easy to access and get to. The reviews were helpful. The hose clamps were difficult to get back in place especially the one from the washer drain to the pump (need wide-jaw pliers). Now that I have seen the system work, the pump was not bad and the water from the drain still smells bad. I just ordered the filter 8181683, which looks like the only other thing that would prevent the water from draining completely. The drain hose is not blocked.

Drain codes

  • Customer: Rohn from Libertyville IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
After diagnosing codes noticed no drain replaced pump asm

Drain pump wasnt working

  • Customer: Tracey from Salem OR
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Looked at how the old drain pump was installed, then removed it and installed the new one. It was a fairly simple fix. The only feedback were that the parts picture was a little confusing becuase the picture didnt really look like the actual part, so we were unsure if we were ordering the correct part.

broken basket dryer

  • Customer: garrett from unionville CT
  • Difficulty: Really easy
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
most would have thrown out the appliance ,but at $1000.00 to replace it was worth the shot to repair ,basket was under warranty (450.00 value )part damaged was the outer plastic being damaged ,washer repaired for under 150.00 and back inservice saved 850.00

Drain kit

  • Customer: Debra from hilliard OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Took old one off and put the new one on. Was very easy. Hardest part was disconnecting hose clamps, which was still easy

broken impeller on drain pump

  • Customer: James from Findlay OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
took front panel off. Pump is right there easy to work on. Used pliers to take 2 hose clamps off. Used star screw driver to take 2 screws off of pump and removed old pump. The Assemblely goes the same way but the drain hose coming off the tube is not very easy to get back on. Hose is flimsey and the stem, on the end of the drain pump isnt long enough to keep hose on while tring to slide hose clamp back on.

needed to install shipping bolts

  • Customer: Anthony from Avon Lake OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Read the instructions provided by PartSelect.....and with a bit of patience I installed all four bolts so the washer's inside agitator was not damaged in shipping. I highly recommend that anyone who is moving/storing or shipping their washer that you find the correct shipping bolts according to your model and make and install them prior to moving your appliance.
All Instructions for the 11042822201
106-120 of 160