Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 11027032602 > Parts

11027032602 Kenmore Washer - Parts

All parts for the Kenmore Washer 11027032602

Below is a list of all parts for the Kenmore Washer 11027032602. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 11027032602
1-14 of 122
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.48

Seal, Inner Cap

This is an inner cap seal, but may also be known as an O-ring, and it is a part for your washing machine. Some symptoms replacing this part will fix include: leaking from your appl...

$21.50

Basket Hub Kit

This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.

$4.48

Agitator Cap Barrier with Seal

The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.

$111.42

Drain Pump

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.

$3.02

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air...

$9.76

INLET HOSE

This hose can handle hot or cold water and is five feet long.

$3.02

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$3.02

Lid Hinge Mounting Screw

Sold individually.

$80.70

Lid Lock Assembly

This part makes sure that the lid is shut before allowing the machine to start or agitate. NOTE: This is a manufacturer substitution. Part may differ in appearance but is a functio...

$5.51

Hose Clamp

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

$70.92

SUSPENSION

$6.24

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.

$3.02

Screw

This screw is sold individually.

$11.10

Hose, Drain Pump

All Parts for the 11027032602
1-14 of 122