11026422501 Kenmore Washer - Instructions

Watched the video on how to repair the problem and did what was instructed to do and the repair was that easy.

Removed control panel and rear panel replaced valve. Checked all grounds and connectors. Works like new.

Disassembled upper agitator to ascertain cause of problem. Agitator directional cogs were worn out. Washer on agitator bolt was also worn off. Replaced those parts along with installing a new thrust spacer and everything works beautifully. Only required a standard #2 flat screwdriver to pop the cover off the agitator and a 7/16 socket on an extension to remove the agitator bolt. Quite a simple project.

I was thrilled that the agitator parts were so easy to replace, but that didn't totally fix my problem. I looked underneath the washer and found black rubber shavings from a worn part and looked online and found that the problem was most likely the Direct Drive Motor Coupling. I watched the video and ordered the part. The coupling was actually broken. After replacing the part, the washer works great...better than it has in years. I think I will work on our dryer now.

Friend of mine did it well

Since I live in a condo (upstairs unit) flipping the machine was not an easy option. So I was faced with having to get the remaining 2-3 gallons of water out of the drum. I rigged something up and collected 80% of the water, but be prepared for a mess. I was and it wasn't a big deal, just took more time. Once part was removed, I got online to find the part- which ranged in price from $67 at a local appliance part distributor to $49 from SearsDirect including postage. Parts select came in at $37 with freight and the part swapped out perfectly- just 2 clips that hold the pump on and 2 hose clamps (I used slip-joint pliers which works well). I checked YouTube for a video first and lo and behold, there was a video about a whirlpool water pump replacement, which helped some. Job went well and I didn't have to replace a $1200 all-in-one.

It was easy with the video.I watched trouble shooting videos till i found the problem. wrote dwn the tools needed.watched video[lucky for me i would have forgot a step without it]orderd part, and was the hero

I installed the inlet valve, and it still overflowed. Then I connected the plastic hose from the water level sensor that had came off, to the water level selector and it worked fine

I performed the repair the same as outlined in the video, but I didn't need to tip the washer on the back side. Once I removed the sheetmetal, I was able to swap out the drive coupler, and the new part is a better design than the one that broke.

I followed the directions in the two videos that were provided on your web sight. It fixed the problem and it only cost us about $60.00. We were so thrilled with the results. We were almost ready to go buy a new washer. My wife suggested that we look it up on line and see if we couldn't fix it ourselves before spending the money on a new washer. Was she ever right! Thanks for providing such fine instructional videos.

My sons did it and they said it was an easy fix. No problems to speak of. Used my washer today. it worked like it was supposed to.

Watched the on site video.....Did everything except removing the cabinet....Laid the washer on the front side and did the repair underneath in less than 30 minutes.....I might add the new coupler is much better than the original which was all white plastic....The new part was nylon and had metal inserts. The original had no inserts. Some have said the original part that had the two flat sides would just round out causing the drum not to agitate or spin. Mine just broke in half. I don't see this new part breaking or rounding out the metal inserts.....I might add Whirlpool OEM part was costing much more and with a 5 business day wait on delivery....Parts Select 1.8 day was advertised and it came in two days.....You won't go wrong doing business with Part Select.

Was going to "...just take it apart and fix it" as my career covered being a mechanic, machinist and vocational instructor for over 35 years. Just in case. I decided to visit the PARTSELECT" website for "How-To" guidance. There I fund excellent troubleshooting guidance, including root-cause analysis in % of likeliest cause(s). This was followed with a brief step-by-step descriptions of "How-To" activities, including necessary tools. Best of all was the short instructional video, showing exactly how to go about the repair in a safe and systematic manner. As a former instructor, I am truly impressed by the quality of the material and service this website offers! It made my job so much easier, and consequently it was well done in no time. I urge every customer to follow the excellent guidelines and strongly recommends this site to others. Total cost of my repair was $11.00 for the part, plus shipping; saving me a bundle and possible grief and frustration! The website gives great customer service off- and on-line with follow through by courteous personnel. Thank you for the superior customer service and level of support at every step!

I just watched your repair video

very well the part was easy to install and the part was easy to find on the diagram furnished by parts select