Models > 11025064500

11025064500 Kenmore Washer - Overview

Get Parts and Repair Help for 11025064500

If you know the washer repair part you need, you can browse the list of all parts on the 11025064500, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for 11025064500 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Hose Clamp

$5.54

Touch-Up Paint - White

$2.03

Single Front Panel Cip

Sold Individually.

$2.03

Lid Hinge Mounting Screw

Sold individually.

$2.70

Hose Clamp

This hose clamp is sold individually.

$23.02

Lid Seal

$6.04

Touch-Up Paint - 1/2oz. - Biscuit

$2.70

Leveling Leg Locking Nut

This nut is sold individually. Size: 3/8-16

$2.70

Screw

This screw is sold individually.

$8.17

Spray Paint - 12 oz. - White

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The washer was displaying FL code, and not draining

  • Customer: chris from davison MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Socket set
  • 12 of 13 people found this instruction helpful
1) Pull the washer away from the wall
2) Lean the washer back so it is balanced and you can see the bottom
3) Remove 3 screws along the front edge of bottom plate
4)Remove plate, exposing the pump
5)Remove 2 clips that hold pump to motor
6)Place the deepest pan you can fit under pump
7)Loosen hose clamp, pull hose SLOWLY from pu... read more

Broken seal

  • Customer: Samuel from Grass Valley CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
Removed old, pressed on new. This is no story but the reason I am writing is to say how impressed I was with the ease of using your Web site to find my part and of your spectacularly fast service. read more

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more