11022902100 Kenmore Washer - Instructions

Turned washer on back, inspected pump area for leak and found crack in pump. Replaced cracked pump with new pump from PartSelect, which arrived promptly. Washer was only down for 3 days and turnup only cost me the price of the part.

Based on the excellent professional video instructions attached on the order delivery verification from PartSelect, I followed the step by step Lid Switch Assembly installation process as shown on the video which was specifically geared for Kenmore 80 series. My installation turned out flawless and the machine was up and running in about 45 minutes.

Saw your video on how to install a waterpump. It made my life very easy.

Wacthed repair video online found problem ordered part 3days later part came installed worked like a charm smootest repair ever thanks john I told a neighbor about your service

this repair was really easy to do and did not take long. i used the video on whirlpool.com made it really easey. washer works like new.

I used the flat screwdriver to pop off the top of the agitator. then I used my socket wrench with extension to remove the bolt holding the top of the agitator to the bottom agitator. I pulled out the small piece that holds the agitator cogs. The agitator cogs were sheared off. I used my screwdriver to remove what was left of them, cleaned up the unit, then installed the new cogs. Re-insert the piece into the agitator unit and tighten the bolt back. Popped the lid back on top and ran a load of laundry to test. It works perfect! Although the teeth are pretty worn on the agitator as well, so I'm looking to buy a whole new agitator unit next. Very easy fix!!

Very easy - less than 30 min. Followed installation video available on PartSelect website, except did not have to disconnect all hoses or lay on back. Left washer in place all connected and raised up on blocks about 6" off floor. Removed cabinet as per video instructions. Changed pump as per video instructions. Video from website was crucial to easy repair. Would not have known how to release cabinet latches and remove cabinet without video. Cabinet was off in 3 min. and entire job was less than 30 min.

Following the video posted with the part made this repair a piece of cake, well documented, filmed, great explanations of tools needed and how to do it all. This is a fantastic site for do it yourself people with a little bit of mechanical skills. BTW I've been a hvy. eqt. mech. for over 40 years so this is something different to tangle with and a lot cleaner. Thanks so much for your time and consideration in produceing this instructional video, and keep up the excellent work.

It was extremely easy and went very well. Installed new switch

Videos made repair simple and easy.Only difficulty was re-installing cabinet.Hard to align.

Had a laptop with the repair video on next to washer and paused after each set of instructions to complete each task. Went perfectly! Only tricky part was fitting the cover back but eventually got it with a bit of jiggling. Very impressed with the instructional video as everything was where they showed it and came apart exactly as explained and more importantly went back together correctly.

I pried up the top timer setting box. Removed two screws on the back pried up the two clamps and disconected the door sensor. removed the outer case and removed the water pump. Put all the parts back on reverse order and was back in working order.

Watched the video on how to repair the problem and did what was instructed to do and the repair was that easy.

Removed control panel and rear panel replaced valve. Checked all grounds and connectors. Works like new.

I was thrilled that the agitator parts were so easy to replace, but that didn't totally fix my problem. I looked underneath the washer and found black rubber shavings from a worn part and looked online and found that the problem was most likely the Direct Drive Motor Coupling. I watched the video and ordered the part. The coupling was actually broken. After replacing the part, the washer works great...better than it has in years. I think I will work on our dryer now.