Models > 11022082101 > Instructions

11022082101 Kenmore Washer - Instructions

All installation instructions for 11022082101 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the washer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 11022082101
1-15 of 27
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.

Broken seal

  • Customer: Samuel from Grass Valley CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 11 people found this instruction helpful
Removed old, pressed on new. This is no story but the reason I am writing is to say how impressed I was with the ease of using your Web site to find my part and of your spectacularly fast service.

Washer lid seal replacement

  • Customer: Kathleen from Ocala FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 3 people found this instruction helpful
Ordered the part, received part in short time and snapped it on in less than a minute. Seals better than original.
Thanks PartSelect. I will be back.

Old seal fell a part and caused bad virbrations

  • Customer: Michael from Tinley Park IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
Slid off the old and slid on the new part. Actually my wife did it with no help and was rather pleased with her self on not needing any help except ordering it.

The lid seal cracked and came off causing vibration

  • Customer: David from Brookhaven PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
Slid the replacement on the lid and it worked like a charm - no more vibration.

Part was cracked and falling apart

  • Customer: Joyce from Dallas TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 5 people found this instruction helpful
Too simple. The old one practicaly fell off and all I had to do was push the new one into place. It locked itself in and was ready to use.

No more rattling or noise when it runs now.

The splashguard on the lid kept falling off and eventually split.

  • Customer: Debra from Mentor OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
Old one fell off in my hands. I just snapped the new one in its place. Super easy. Repairman wanted $43 for the part plus the labor of $39. THe part cost me just $20 with shipping. Thanks!

Lid seal was torn

  • Customer: Debra from Ridgway PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Pulled off the old torn seal & in about 15 seconds had the new one put on, couldn't have been easier.

Cracked, broken seal

  • Customer: Ronald from Glenwood MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
The old seal had become brittle, cracked and fragmented and would no longer fit in the slot. Without it, washing had become a real mess. I took the new seal and snapped it in within a few seconds and was back up and running again. I looked everywhere for this seal, but this site was the only place I could find it. Thanks for having such a wide range of parts. This inexpensive broken part had made my machine unusuable. If it were not for you, I probably would have to resorted to a Sears appliance technician who would have charged $60 for just showing up.

rubber seal broke aprt

  • Customer: Lisa from North Attleboro MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
slid the old seal off the lid and the new one popped on so easily
I do so many self- repairs at home now this was not even an issue.

rubber lid cushioning strip broke

  • Customer: Bruce from Hammett ID
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
the original piece had 3 metal clips that held the strip in place. It was a matter of sliding the strip off and sliding the new replacement part on. Time involved was less than one minute. It took longer to find the part than to install it. The part was ordered Thursday night and it was installed by Monday! Great service!

The washer lid seal was torn and because, I think, I was getting a moldy/musty smell from the washer and in the clothes.

  • Customer: Erik from Atkinson NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
It was simple slide off the old seal and then clip on the new one. I also want to thank the workers at Parts Select, it was very simple and everything went great. I will be using them again and passing the word on.

lid gasket became older and brittle and eventually broke and cracked

  • Customer: kenneth from oregon city OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Ordered the part and a couple of days later I popped off the old and popped on the new. It took longer to remove the part from the box than to install it.

The original seal on had deteriorated and was coming apart.

  • Customer: Sandra from Hamilton NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Really nothing to it, especially since the original seal was coming apart. I just ripped it the rest of the way apart and removed it, then slid the new one on in its place.

wow!

  • Customer: Sheila from Borger TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
I received the order quickly (although thought it could have been packaged in a much smaller box) and it took less than 10 mins to remove the old seal and replace with the new one. Only problem is the seal I ordered wasnt causing the problem ..lol so will be ordering again!!! Thank you!
All Instructions for the 11022082101
1-15 of 27