Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 11022066100 > Instructions

11022066100 Kenmore Washer - Instructions

All installation instructions for 11022066100 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the washer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 11022066100
1-15 of 27
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Scratches in Surface

  • Customer: Michelle from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 20 of 29 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.

Broken seal

  • Customer: Samuel from Grass Valley, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 12 of 14 people found this instruction helpful
Removed old, pressed on new. This is no story but the reason I am writing is to say how impressed I was with the ease of using your Web site to find my part and of your spectacularly fast service.

Washer lid seal replacement

  • Customer: Kathleen from Ocala, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 3 people found this instruction helpful
Ordered the part, received part in short time and snapped it on in less than a minute. Seals better than original.
Thanks PartSelect. I will be back.

Old seal fell a part and caused bad virbrations

  • Customer: Michael from Tinley Park, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
Slid off the old and slid on the new part. Actually my wife did it with no help and was rather pleased with her self on not needing any help except ordering it.

The lid seal cracked and came off causing vibration

  • Customer: David from Brookhaven, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
Slid the replacement on the lid and it worked like a charm - no more vibration.

Part was cracked and falling apart

  • Customer: Joyce from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 5 people found this instruction helpful
Too simple. The old one practicaly fell off and all I had to do was push the new one into place. It locked itself in and was ready to use.

No more rattling or noise when it runs now.

Both outside door handles turned very beige

  • Customer: Howard from Boynton Beach, FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 8 of 21 people found this instruction helpful
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you

The splashguard on the lid kept falling off and eventually split.

  • Customer: Debra from Mentor, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
Old one fell off in my hands. I just snapped the new one in its place. Super easy. Repairman wanted $43 for the part plus the labor of $39. THe part cost me just $20 with shipping. Thanks!

the rubber lid seal had torn and was falling off of the lid.

  • Customer: VICKIE from MEQUON, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
I removed the torn part which just pulled off of the lid and snapped in the new piece. No tools were needed. I also wanted to add that it was great doing business with Part Select. The part came well packaged, it came in a timely manner, and it was the correct part ! I will try Part Select for any of my future repair part needs.
Thank you

Lid seal was torn

  • Customer: Debra from Ridgway, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Pulled off the old torn seal & in about 15 seconds had the new one put on, couldn't have been easier.

Plastic piece had split

  • Customer: Lana from Atlantic Beach, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Very easy --just put it onto the metal and it slipped right on.

wow!

  • Customer: Sheila from Borger, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
I received the order quickly (although thought it could have been packaged in a much smaller box) and it took less than 10 mins to remove the old seal and replace with the new one. Only problem is the seal I ordered wasnt causing the problem ..lol so will be ordering again!!! Thank you!

Cracked, broken seal

  • Customer: Ronald from Glenwood, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
The old seal had become brittle, cracked and fragmented and would no longer fit in the slot. Without it, washing had become a real mess. I took the new seal and snapped it in within a few seconds and was back up and running again. I looked everywhere for this seal, but this site was the only place I could find it. Thanks for having such a wide range of parts. This inexpensive broken part had made my machine unusuable. If it were not for you, I probably would have to resorted to a Sears appliance technician who would have charged $60 for just showing up.

rubber seal broke aprt

  • Customer: Lisa from North Attleboro, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
slid the old seal off the lid and the new one popped on so easily
I do so many self- repairs at home now this was not even an issue.

rubber lid cushioning strip broke

  • Customer: Bruce from Hammett, ID
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
the original piece had 3 metal clips that held the strip in place. It was a matter of sliding the strip off and sliding the new replacement part on. Time involved was less than one minute. It took longer to find the part than to install it. The part was ordered Thursday night and it was installed by Monday! Great service!
All Instructions for the 11022066100
1-15 of 27