Models > 11016962502 > Instructions

11016962502 Kenmore Washer - Instructions

All installation instructions for 11016962502 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the washer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 11016962502
931-945 of 985
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

agitator wouldnt move

  • Customer: robert from Roanoke, VA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Well i'm an auto technician by trade so I just jumped right in without reading or watching anything, but I saw the video and in the days waiting for the part to show up I watched it. I would recommend everyone to watch the video because it is simpler than I made it.Easy repair any mechanical skills at all and you shouldnt ave any trouble.

grinding noise wouldnt spin

  • Customer: Johnathan from Mountain Home, ID
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
I have never fixed a washer, but this website made it very easy. I watched the video so there were no surprises. I unpluged the machine and disconnected the water lines and removed the two back screws. The control panel and shell came of very easy, i then tipped the washer on to its backand removed the clamps holding the motor. The motor came out very easy and the coupler was a cinch to put in. After that I reversed the process and then the wife was happy she got her washer back, Iwas happy too because I didnt have to buy a new one.

washer would not agitate or spin, even after replacing coupler

  • Customer: GEORGE from GERMANTOWN, KY
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Socket set
  • 0 of 0 people found this instruction helpful
Found input to gearcase deformed, so new coupler slipped under load. Replaced gearbox. All function restored, but machine banged harshly during spin. Discovered that "skid plate" had shifted during gearbox replacement. Remounted skid plate carefully with pry bar, correcting vibration.

Pumps but won't spin, leaks, top of agitator doesn't move

  • Customer: Kenneth from Talbott, TN
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
My repair was successful but was not as easy as some have reported. I needed to replace the coupler, but when I tried to remove the pump from the motor, the shaft was rusted and wouldn't budge. I pried and wiggled and used WD-40 to no avail. I ended up taking off the motor and pump as a unit. After replacing the coupler and reassembling the washer, the water pump leaked, probably as a result of all of the prying. To get the water pump off, I had to cut it into pieces, using a hack saw. Even when I got down to the end, I had to peel pieces of plastic off of the rusted shaft. I then had to file and sand the shaft to get it so that it would fit into the new pump. After putting the washer together again and running it through its cycles, I noticed that the top half of the agitator was not turning. I then ordered and installed the agitator repair kit. Through all of this, my orders were all correct and arrived in amazingly fast times. The videos were all very helpful. Even though it was a trial a times, I still saved a pile of money.

noise caused b y broken coupler between motor and transmission during "spin" and not spinning

  • Customer: John P from Brazil, IN
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
removed motor and broken coupler... installed new coupler and replaced motor. also removed pump to inspect for sock, etc. that that might have caused coupler to break.. ADVICE: Look for how-to video on YouTube first. Remove outer cabinet according to video by first removing the top control panel and then remove the outer cabinet which exposes the motor and pump. This way you will not have to tip machine up/back and work under it. This repair is made easily by first removing the outer cabinet.

Washer would not spin

  • Customer: Mark from McCall, ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
I followed the instructions from a YouTube video, just do a Google search for the make, model, and what the problem is and several videos will come up to pick from. Everything went just as described in the video, took about 10-min to take the motor out, a couple of minutes to replace the broken motor coupling, and another 10-min to put it back together - slick.

The washer was making noise and was leaving the cloth dripping wet at end.

  • Customer: Kenia from Orlando, FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Before I even watch any partselect videos to do the repair, which I should of from the very beginning, ah, ja, ja, I had already disassembled the back panel "my way" to the washer and trouble shooting the washer with my wife's help. While she tilted the washer backwards, I looked under and we found that the noise was coming from in between top of the motor where the direct drive motor coupling is located and the clutch assembly came together which I learned along with names and functions after watching the partselect installation video. Nice! Once I received the part it took me like 45 minutes to put all back together. Took loose two screws to clips holding the motor, pulled motor of mounting bracket finding the broken piece, replaced it, recouped reinstalling motor onto the motor bracket, clip, clip the two little screws and walla, got the wife her washer back, at bed time rewards, peace of mind the rest was history... Thanks PartSelect for awesome videos and great customer service!

agitator,drive motor coupling,water pump 3 problems

  • Customer: judy from lawrenceville, GA
  • Difficulty: Really Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
I watch the you tube, and try to fix it by myself,to save money, and moving trouble.this is my first time fix a big machine like this,I was a little scare, but after I saw the youtube about how to fix the washmachine,I start to give a try.it take little bit more time for me to figure out ,but I finally made it. now I can wash my cloth now, and perhaps fix washmachine for my exrat income.( message sharing from an asian 58 yrs old lady, sorry for unable to show step by step due to English not very good)

washer was squealing during wash and spin cycle

  • Customer: George from Cole Spring, KY
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Followed the video and instructions included with part. At first we did not think the repair was successful, but after several small loads were run, squealing stopped. The washer is 16 years old and so far is running like new. We certainly appreciated the great customer service. The part was delivered in less than 24 hours.

Would not spin,but would fill and drain and could hear motor and trans worked

  • Customer: Diana from Sherborn, MA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Follow instructions in part repair video from part select,but put washer on back first to see if can access area without removing the whole outer cover we did not even need to do that step only took 20 minutes to replace coupling. The video was great

Washer wouldn't spin and we could see coupling was broken

  • Customer: Sharon from Marina, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
We watched the how to video...repair took less than 15 minutes. You can't go wrong if you just watch the easy to follow video! Washer works as good as new.

bushing between motor and transmision broke

  • Customer: NAN from mt carroll, IL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
watched the video on line showed how to do it took about 45 min no problem

washer would not spin or agitate.

  • Customer: Gerald from White Cloud, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
electric unplugged, removed water lines. two screws on back of control housing removed, tilted housing back, removed two clips on top of washer housing, removed body. tilted washer backward, removed brackets on water pump and electric motor, pulled motor off and removed broken parts on shaft, replaced with new parts. Lining up motor shaft to washer was a bit tricky but time and patience got it togather. replaced brackets on motor and water pump. put washer upright and put body back on the body has to be set on guides correctly or will not set right. replace clips andtilt top down and screw it. hook up water lines, and electric.

motor running . no spin cycle

  • Customer: joe from loveland, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Tipped the washer on its side and took the pump off then the motor then the coupling.

Washer would not always spin

  • Customer: Donald from Metter, GA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I purchased the part from PartSelect because it was very reasonable and it was OEM part. I have never replaced this kind of part on a washer so I figured it would take me a while. But PartSelect supplied a video showing the entire repair and that was the only reason I did not struggle with the repair. I will definitely buy any appliance parts I need in the future from PartSelect. Thanks Don
All Instructions for the 11016962502
931-945 of 985