11016202690 Kenmore Washer - Instructions

Followed the video that was attached to the link where i ordered my part. Seriously, could not have been easier!! Thank you so much!!

i did the repair by myself but based on the video that part repair provided me with.

2nd time partselact has saved my ~13 year old washer for a total of ~40$ Entered the symptom and they told me more than likely what to look for and VIOLA ! Would've been easy to spend $200 each time my washer quit working but with a suggestion from a menu and even a video to show me how I revived my old $400 AMERICAN made washer to wash another day. Thank you part select !!

I watched a u-tube video from a repair man by the name of angel // this man is a detacated mechanic knows his job //used his diagnostics and the job was a piece of cake // he covers every aspect of all problems //// praise to angel ////

Very easy - less than 30 min. Followed installation video available on PartSelect website, except did not have to disconnect all hoses or lay on back. Left washer in place all connected and raised up on blocks about 6" off floor. Removed cabinet as per video instructions. Changed pump as per video instructions. Video from website was crucial to easy repair. Would not have known how to release cabinet latches and remove cabinet without video. Cabinet was off in 3 min. and entire job was less than 30 min.

Following the video posted with the part made this repair a piece of cake, well documented, filmed, great explanations of tools needed and how to do it all. This is a fantastic site for do it yourself people with a little bit of mechanical skills. BTW I've been a hvy. eqt. mech. for over 40 years so this is something different to tangle with and a lot cleaner. Thanks so much for your time and consideration in produceing this instructional video, and keep up the excellent work.

Videos made repair simple and easy.Only difficulty was re-installing cabinet.Hard to align.

Had a laptop with the repair video on next to washer and paused after each set of instructions to complete each task. Went perfectly! Only tricky part was fitting the cover back but eventually got it with a bit of jiggling. Very impressed with the instructional video as everything was where they showed it and came apart exactly as explained and more importantly went back together correctly.

I pried up the top timer setting box. Removed two screws on the back pried up the two clamps and disconected the door sensor. removed the outer case and removed the water pump. Put all the parts back on reverse order and was back in working order.

Removed control panel and rear panel replaced valve. Checked all grounds and connectors. Works like new.

followed the directions that were on the website, all the steps were so easy to follow but when we went to put the frame back on it was a little tricky to make sure the front of the washer frame was under the housing and the rest just went very well i am so amazed at the simplicity of this we are not mechanically inclined and we saved a lot of money and the machine is purring like a kitten thanks to all who have written in it sure helped us.. Linda and Ken

I was thrilled that the agitator parts were so easy to replace, but that didn't totally fix my problem. I looked underneath the washer and found black rubber shavings from a worn part and looked online and found that the problem was most likely the Direct Drive Motor Coupling. I watched the video and ordered the part. The coupling was actually broken. After replacing the part, the washer works great...better than it has in years. I think I will work on our dryer now.

Since I live in a condo (upstairs unit) flipping the machine was not an easy option. So I was faced with having to get the remaining 2-3 gallons of water out of the drum. I rigged something up and collected 80% of the water, but be prepared for a mess. I was and it wasn't a big deal, just took more time. Once part was removed, I got online to find the part- which ranged in price from $67 at a local appliance part distributor to $49 from SearsDirect including postage. Parts select came in at $37 with freight and the part swapped out perfectly- just 2 clips that hold the pump on and 2 hose clamps (I used slip-joint pliers which works well). I checked YouTube for a video first and lo and behold, there was a video about a whirlpool water pump replacement, which helped some. Job went well and I didn't have to replace a $1200 all-in-one.

When I pulled the machine out, I noticed one of the suspension springs on the floor. I followed the video supplied by PartSelect.com and suggestions by other folks. I started with the spring that was missing, which was a mistake since I did not know that there are custom spring clips which hold the spring to the drum. Once I found the missing part the installation was very easy. I used the suggestion by another post, of wedging a block of wood between the back of the machine and drum, to relax the rear suspension spring, which eliminated having to remove the back of the machine or tipping the machine on the back to get at the screw. I will always look to PartSelect.com for any future appliance repairs. You are the greatest

It was easy with the video.I watched trouble shooting videos till i found the problem. wrote dwn the tools needed.watched video[lucky for me i would have forgot a step without it]orderd part, and was the hero