Models > 1100PRW Maytag

1100PRW Magic Chef Range - Overview

Get Parts and Repair Help for 1100PRW

If you know the range repair part you need, you can browse the list of all parts on the 1100PRW, or you can search by name or part description. You can also find your part by where it is located on the 1100PRW by selecting a section below. We’ve also included any installation videos we have for 1100PRW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Screw

This screw is sold individually.

$18.07

2 Piece Broiler Pan

$17.23

ANCHOR-TIP

$2.70

Screw

This screw is sold individually.

$4.60

Screw

This screw is sold individually.

$2.70

Door Handle Spacer Kit

This door handle spacer assembly contains two screws and two spacers.

$2.70

Frame Screw

Sold Individually.

$94.37

USE WPL 74006282

$32.87

Door Side Seal

Sold individually. Order quantity required.

$31.27

Oven Rack

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

pilot lit but oven would light

  • Customer: Paul from Arlington MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 10 of 13 people found this instruction helpful
replaced the oven safety valve. This device uses heat from the pilot to hold open a valve that allows gas from the thermostat control to feed the main burner. It works by boiling the liquid mercury in the sensor bulb, producing the pressure to hold open the valve. My sensor had failed from old age, leaking the mercury.

Spilled mercury needed to... read more

Pilot light would go out when oven was turned off but still allowed gas.

  • Customer: Steven from Oklahoma City OK
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench set, Wrench(Adjustable)
  • 3 of 9 people found this instruction helpful
l removed the top section after the grates. Then l took the phillips screws out of the three brackets which hold the L brace which supports the controls,thermostat and the regulator. Only because l did not have a closed-end ratchet wrench for 1/4" and l could not locate my 1/4" socket for my small rachet. l disconnected all gas lines and the thermocouple, t... read more

missing one oven rack

  • Customer: Ana from Riverside RI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 6 people found this instruction helpful
put it on, perfect read more