Models > 110-505R372

110-505R372 MTD Lawn Mower - Overview

Models starting with 110-505R372

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.44
  In Stock
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.95
  In Stock
Lower Handle – Part Number: 749-0928A-0637
Lower Handle
PartSelect #: PS9303048
Manufacturer #: 749-0928A-0637
$34.18
  In Stock
Int. Cotter Pin 5/16" Dia. – Part Number: 914-0104
Int. Cotter Pin 5/16" Dia.
PartSelect #: PS9164893
Manufacturer #: 914-0104
The Int. Cotter pin 5/16" is an individually sold, silver metal Cotter pin measuring 5/16 x 34. It can be used to secure and lock parts in place, requires pliers to install, and is rated as "Easy" to ...
  No Longer Available
Control Cable - 39" – Part Number: 946-0550
Control Cable - 39"
★★★★★
★★★★★
(1)
PartSelect #: PS9311786
Manufacturer #: 946-0550
$23.18
  In Stock
TT Sems Screw 3/8-16 X 1.0" – Part Number: 710-0654A
TT Sems Screw 3/8-16 X 1.0"
PartSelect #: PS9100242
Manufacturer #: 710-0654A
$4.32
  In Stock
Hex Nut 5/16-18 – Part Number: 912-3010
Hex Nut 5/16-18
PartSelect #: PS9309225
Manufacturer #: 912-3010
$3.29
  Special Order
Discharge Chute – Part Number: 931-1034B
Discharge Chute
PartSelect #: PS9310891
Manufacturer #: 931-1034B
$73.53
  In Stock
Hex B-Tap Scr. #10 x .44" Lg. – Part Number: 710-0919
Hex B-Tap Scr. #10 x .44" Lg.
PartSelect #: PS9298834
Manufacturer #: 710-0919
$4.55
  In Stock
Hinge Clip – Part Number: 17098P
Hinge Clip
PartSelect #: PS8885743
Manufacturer #: 17098P
$3.22
  Special Order
Ball Bearing – Part Number: 941-0484
Ball Bearing
PartSelect #: PS9311596
Manufacturer #: 941-0484
$7.91
  On Order
Hex Screw, 3/8-16:1.00 – Part Number: 710-0514
Hex Screw, 3/8-16:1.00
PartSelect #: PS9089268
Manufacturer #: 710-0514
$4.36
  In Stock
View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Parts Used:
Rear Flap (22&#34)
  • David from PITTSBURGH, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top