Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 1093B3A

1093B3A Roper Wall Oven - Overview

Get Parts and Repair Help for 1093B3A

If you know the wall oven repair part you need, you can browse the list of all parts on the 1093B3A, or you can search by name or part description. You can also find your part by where it is located on the 1093B3A by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.85

Heating Element

The heating element provides heat to your dryer during the drying cycle. If you notice that your dryer is taking too long to dry clothes, or is providing little or no heat, you may...

Order within the next 4 hrs and your part ships today!
$35.81

Bearing and Seal Kit

This front bearing and seal kit comes with the adhesive.

Order within the next 4 hrs and your part ships today!
$23.68

SWTCH-LITE

Order within the next 4 hrs and your part ships today!
$3.02

Hex Nut

This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts and screws in order to hold items firmly together. This piece is a fastener that attaches one item to another. This part has several advantages, the main one being that it is universal and can be used with most pieces and appliances in your home. This hex nut is an original equipment manufacturer part, meaning it is directly sourced from the manufacturer.

Order within the next 4 hrs and your part ships today!

TIME ADJUS

PIPE BRA

BRACKET FO

Igniter (Broil. & Oven Burner)

HARNS-WIRE

Bushing-Reducer

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer quit heating. Suspected heating element was open

  • Customer: Bill from Morristown, TN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench (Adjustable)
  • 235 of 265 people found this instruction helpful
Unplugged the 220 volt source. Disconnected the vent line from the back of the drier. Removed the six screws holding the back panel with a 1/4 inch nut driver. Tipped the drier up at a 45 degree angle against the wall to give better access to the inside. Removed the screws holding the two thermostats to the side of the heater box and laid them aside. Di... read more

Dryer was not heating

  • Customer: Frank from Fort Collins, CO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 76 of 84 people found this instruction helpful
This is the second heating element I have replaced in this dryer which I bought new in 1977. That's right it is 32 years old and still works great!

The replacement process is simple:
One: pull the dryer away from the wall so that you have room to work in the back.
Two: Disconnect the dryer vent hose from the back of the dryer.
Three... read more

Loads in the dryer took a very long time to dry often needing two full cycles to completely dry.

  • Customer: Rod from Galveston, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 34 of 48 people found this instruction helpful
First, I moved the dryer out where it would be easily accessable. I then removed the back of the dryer using a nut driver. Once this was complete, I removed the cover holding the heating element. I disconnected the two wires and puled the old element out. I replaced it with the new heating element and reconnected the two wires. I then replace the back cover ... read more