This genuine OEM replacement part is a water filter for your fridge or freestanding ice maker. The filter is used to remove contaminants and particles from the water, to ensure a clean and fresh taste...
This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light ...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This bin temperature sensor is for ice makers.
The bin temperature sensor monitors the temperature in the ice maker bin and sends the temperature reading to the electronic control board.
Disconn...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This ice maker scoop is an OEM refrigerator part designed to retrieve ice from the ice maker bin. It is made of plastic and measures approximately 10 3/4 inches in length and 4 inches in width. The sc...
This is a condenser fan motor for your refrigerator/freezer. This fan motor is most commonly used with frost-free refrigerators with a condenser coil. It controls the rotation of the condenser fan bla...
Manufacturer's Number: 20000008 Helps restore luster and remove streaks from stainless steel appliances and cookware.
No Longer Available
Questions And Answers for 10689593102
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Danny
June 24, 2021
Ice maker stopped making ice and i did the normal routine by using afresh cleaner and cleaning the coils but still not making ice.
For model number 10689593102
Hi Danny,
Thank you for your question. If the room temperature is too low, the ice maker will shut off. Make sure that the room temperature is above 55°F. Also, check to see that the control is turned on and that the ice maker is plugged into an outlet that is working. If the drain line is kinked, remove the kinks. We hope this helps! Good luck with the repair!
Was this helpful?
Thank you for voting!
Mikah
March 3, 2023
My ice maker is making way to much ice what could the problem be and is there a reset button
For model number 10689593102
Hi Mikah, thank you for your query. If your ice maker is making too much ice, make sure that the ice bin is directly below the ice maker. If the ice bin is not in the correct place, the shutoff arm will not work properly, and the ice maker will continue to produce ice. If you have removed the shelf from the freezer, there will be too much space between the ice maker and the ice bin. Replace the freezer shelf to have the correct bin spacing. If this does not help, then you may need to check the following parts: the ice maker switch, part number PS12348182, which shuts off ice production if it detects the water filter is not in place, and the electronic control board, part number PS12346592. We hope this solves your problem!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
I'm an hvac/r technician, and regularly work on ice machines. Begin my pulling the white over beneath the control panel. It snaps in place so pull on the bottom then left out. 1/4 nut driver is all you need, and remove the screw holding the bin thermistor clip to the side. Up to the right , beneath the control panel, behind the plasti
... Read morec panel you previously removed is the mollex connector. Unplug the thermistor and follow instructions in reverse to reinstall.
