Models
>
10689582702
10689582702 Kenmore Ice Maker - Overview
Sections of the 10689582702
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
PUMP
PartSelect #: PS16730541
Manufacturer #: W11566405
A recirculating pump is used with standalone ice cube makers. It circulates the water over the top of the evaporator plate, which produces a layer of ice that is then broken down into ice cubes. If yo...
$67.84
In Stock
Thermistor
PartSelect #: PS11755741
Manufacturer #: WPW10503764
This is a bin thermostat made for standalone ice makers to activate the ice maker shut-off when bin is full. It senses how much ice is in the bin to determine if it should produce more ice or activate...
$75.62
In Stock
Door Light Switch
PartSelect #: PS11738900
Manufacturer #: WP2149705
The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the door, the contacts ins...
$30.34
In Stock
Temperature Sensor
PartSelect #: PS11756166
Manufacturer #: WPW10548509
This is a temperature sensor. It may also be known as an ice maker sensor and is used in conjunction with your ice machine. This piece is roughly 3.5 inches long, almost 2.5 inches wide, and includes ...
$91.12
On Order
SCOOP
PartSelect #: PS12745542
Manufacturer #: W11420408
This ice maker scoop is an OEM refrigerator part designed to retrieve ice from the ice maker bin. It is made of plastic and measures approximately 10 3/4 inches in length and 4 inches in width. The sc...
$11.81
In Stock
Evaporator Thermistor
PartSelect #: PS11740333
Manufacturer #: WP2313635
Used with free-standing ice cube makers.
$53.01
In Stock
Water Pump Assembly
PartSelect #: PS1484571
Manufacturer #: 2313702
This part includes the recirculation pump and motor sensor.
$199.34
In Stock
Screw 8-18 x 5/8
PartSelect #: PS11741613
Manufacturer #: WP3400884
Screw size is 8-18 x 5/8". Used with stand-alone ice cube makers.
$5.36
In Stock
Screw
PartSelect #: PS11742749
Manufacturer #: WP489443
This screw is sold individually.
$5.36
In Stock
Screw - 8-18 x 1/2
PartSelect #: PS11742751
Manufacturer #: WP489464
Sold individually.
$10.83
In Stock
Questions And Answers for 10689582702
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 10689582702
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken light switch
Took all the screws out of the plastic shroud that encloses the switch .There only four that I needed to remove, were the two in front where the switches that go,they go in horizontally and two in the back with large washers on them that hold the back to the top of the box that go in vertically.The switch was a snap ( make that two snaps
... Read more
) the wiring is almost self explanatory. then it gos back to the way you took it off. OH! and don't forget to turn the light bulb all the way back in to the socket , so the light will work after you take the time to install it yourself.I had the water supply line from under the box to the water dispenser in the door and the total bill on that was one hundred thirty seven and a hand full of change.Don't be afraid to do it yourself the savings is enough on one one item to make several months payments on a new one Randy the "Handy Man'
Read less
Parts Used:
-
Randy from Hays, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
77 of 128 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
was not making ice
diagnosed no water flow over evaporator checked voltage into pump then checked pump with ohm meter ordered pump and installed by removing access cover and water holding assembly installed new pump replaced water holding assembly and access cover and returned icemaker to service all is well
Parts Used:
-
Richard from North Wilkesboro, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
48 of 57 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker overfilling with ice and would not stop production when full.
Very easy to replace. Down load the Manual online for a completely operating manual. Thermistor can be tested with an Ohm Meter. Proper values are listed in operating manual.
Parts Used:
-
Ray from Terry, MS
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
25 of 32 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!