Models
>
10689582700
10689582700 Kenmore Ice Maker - Overview
Sections of the 10689582700
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
PUMP
PartSelect #: PS16730541
Manufacturer #: W11566405
A recirculating pump is used with standalone ice cube makers. It circulates the water over the top of the evaporator plate, which produces a layer of ice that is then broken down into ice cubes. If yo...
$67.84
In Stock
Temperature Sensor
PartSelect #: PS11756166
Manufacturer #: WPW10548509
This is a temperature sensor. It may also be known as an ice maker sensor and is used in conjunction with your ice machine. This piece is roughly 3.5 inches long, almost 2.5 inches wide, and includes ...
$91.12
On Order
Water Pump Assembly
PartSelect #: PS1484571
Manufacturer #: 2313702
This part includes the recirculation pump and motor sensor.
$199.34
In Stock
Screw 8-18 x 5/8
PartSelect #: PS11741613
Manufacturer #: WP3400884
Screw size is 8-18 x 5/8". Used with stand-alone ice cube makers.
$5.36
In Stock
Questions And Answers for 10689582700
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
was not making ice
diagnosed no water flow over evaporator checked voltage into pump then checked pump with ohm meter ordered pump and installed by removing access cover and water holding assembly installed new pump replaced water holding assembly and access cover and returned icemaker to service all is well
Parts Used:
-
Richard from North Wilkesboro, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
48 of 57 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water flow
Took the two pumps tested them with 12 volt Battery. one pump didn't work. Looked up part nomber on Google and it lead me to this Co.
Parts Used:
-
Gary from Chickasha, OK
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
19 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not flowing over cooling plate
Removed ice scoop and holder. Remove front cover and pump bracket. Replaced pump and replaced covers. Started up and working well.
Parts Used:
-
Tom from Galesburg, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
13 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!