Models > 106627300

106627300 Kenmore Freezer - Overview

Get Parts and Repair Help for 106627300

If you know the freezer repair part you need, you can browse the list of all parts on the 106627300, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for 106627300 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$13.53

Defrost Timer Kit - 120V 60Hz

This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle an...

$2.70

Cover Screw

Sold individually.

$2.07

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$4.66

Door Hinge Nylon Washer

$2.70

Hinge Washer

$5.74

SCREW

Sold individually.

$2.70

Screw and Washer

Sold individually.

$4.91

CLAMP

Hose/wire clamp.

$27.12

DRIER-TUBE

$5.67

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Freezer Iced up, dripping water into refrigerator below

  • Customer: Robert from Bradenton FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 41 of 49 people found this instruction helpful
De-iced the refrigerator. Removed two screws from the thermostat panel on the upper refrigerator section. Tilted it down, removed two speed nuts holding the timer, unplugged the timer plug. Determined from the instruction sheet (easy to follow) what time delay function is used, based on wire colors, placed the jumper on the correct terminal on the new tim... read more

Defrost timer was faulty. It would not restart on it's own.

  • Customer: Ed from Frankfort IN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 27 of 38 people found this instruction helpful
Just removed the old timer and attached the wires to the new one and replaced the old. That simple! read more

Defrost timer was faulty. Required a mild tap to restart

  • Customer: LES from MADERA CA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 24 of 28 people found this instruction helpful
Trouble shot the electrical circuit per the electrical schematic and zeroed in when I noted the Defrost Timer circuit was open. When I tapped on the bottom of the timer it began functioning normally (for a few days). Ordered a new Defrost Timer Kit and along with the installation instruction, I watched the on-line video. It was very helpful!!
After in... read more