Below is a list of all parts for the Kenmore Refrigerator 10657572791. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
This part controls the light.
This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.
This part may come with a plastic or metal auger depending on the factory. It will work with your appliance if found with the model number.
This part attaches to the drive shaft of the ice dispenser motor.
This compression nut is used with the plastic water line of the icemaker assembly.
This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.
This dispenser door pin comes with the washer.
Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice when activated.
This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.
This kit no longer includes the connectors. It is only the tubing/water reservoir.
Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16...
Once a glass is pressed against the actuator pad it will cause the dispenser to deliver water when activated.
This door gasket is used to seal the freezer door when closed.
This door gasket is used to make an air-tight seal for the cabinet when the door is closed.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.