Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 10656536400 > Parts

10656536400 Kenmore Refrigerator - Parts

All parts for the Kenmore Refrigerator 10656536400

Below is a list of all parts for the Kenmore Refrigerator 10656536400. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 10656536400
57-70 of 324
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$26.66

Thermistor

This part is used to detect the temperature in the air inside of your refrigerator.

$22.43

Top Hinge - Right Side

$6.85

Dispenser Door Pin

This dispenser door pin comes with the washer.

$6.24

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.

$42.08

Push-On Start Relay

This is a push-on start relay for your refrigerator. It attaches to the compressor and starts it by briefly boosting it. It will then shut off as soon as the motor is up to the req...

$48.72

Heater, Defrost

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the defrost heater.

$30.04

Stripper Arm Kit

This kit includes the stripper arm and fill cup.

$128.60

Fresh Food Door Gasket

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$97.15

Air Diffuser

This part is controlled by the thermistor.

$96.02

Ice Mold

This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake resistant which prevents the coating on the mold from flaking into the ice cubes when the ice mold begins to wear. The ice mold forms the ice cubes and the heater allows the ice cubes to fall from the ice mold to drop them into the ice bucket. You will need to remove the ice maker from the refrigerator to access the mold and heater assembly. This is a genuine replacement part.

$31.33

Water Filter Outlet Tube Kit

$4.87

Bottom Kickplate Clip

This clip is sold individually.

$57.76

Water Dispenser Reservoir Tubing

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16...

$4.79

Spring, Latch

Sold individually.

All Parts for the 10656536400
57-70 of 324