Models > 10656532400 > Instructions

10656532400 Kenmore Refrigerator - Instructions

All installation instructions for 10656532400 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 10656532400
1,366-1,380 of 1,499
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door was stuck open

  • Customer: Stewart from Crosby, TX
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
If you follow the video to the letter it's a piece of cake

My ice maker was not making ice

  • Customer: Alfred from Baltimore, MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Based on research done on your site, I concluded that my problems was the icemaker control. The video showed me exactly what to do. During removal, I dropped the unit and broke the water fill cup. Ordered the control unit (as well as a replacement for the broken cup). Installed in about ten minutes. You really can't mess up. It only goes in one way! The next day, bucket was full of ice. Thanks for all the help. I figured I saved $200.00 on the cost of a technician call.

No Ice

  • Customer: Rodger from Fort Washington, MD
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Remove icemaker control assembly, replaced with new one.

would not make ice

  • Customer: Cynthia from Hinton, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I watched the video then made the repair it was just like the video said very easy

Freezer stopped making ice cubes.

  • Customer: Mark from Williamstown, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
At first I thought the problem ws with the water valve. I tested it and got a normal reading. Just as Partselect suggested, it was the Icemaker Control and Motor Assembly. Once I removed the old one I noticed it was dry rotted on the plastic stem that turns the wheel. I tried to replace it while it was still in the freezer. That didnt work very well so I ended up taking the whole ice maker out as shown in the video. Once everything was back together and plugged in I heard that sweet sound of water flowing down the chute into the ice maker. About 4 days later the ice bucket was full to the top with ice.

ice tray wouldn't fill with water

  • Customer: Ken from garden city, ID
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
I shut the water relieved the water pressure. unplugged the refrigerator removed the electronic control board and emitter.there was one screw i took off on the right rear side of the ice maker to remove a wire connector cover .then on the left front bottom side of the ice maker assembly i took a flat head screw driver gently pushed up on the plastic clip and it pulled straight out disconnected the wiring harness put the new icemaker control motor assembly in.put the assembly back in.the new emitter and receiver boards in turned the water and power back on.it took about a hour before the ice tray filled up with water and started doing it's thing very easy fix.

Ice maker doesn't make ice.

  • Customer: Lowell from Discovery Bay, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Changed the Motor Assembly. Wasn't the problem. If I had followed your trouble chart a little farther I would have found out it was the circuit boards. All is well and I might add that yor guide with the parts and video are priceless. Very Happy. Lowell Onstad

Ice maker stopped making ice

  • Customer: Mark from Coraopolis, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
I followed the simple steps in the awesome repair video!

Unit stopped making Ice

  • Customer: Denis from Columbia, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Found my unit had stopped making ice. I did 20 min. of search on the internet and found this site. I was going to just buy the whole ice maker unit, but after reading a bit more found that the majority was just the motor assembly. I ordered it, 2 days later it was at my front door. I pulled the ice maker unit out, took off the motor assembly, and low and behold a small whit ppiece of plastic fell out. I replaced the motor assembly re installed the ice maker and in one hour I had ice again. As far as ease to do this job from 1 being hard and 10 being super easy, I would rate this a 10+. If you have this kind of problem, I would not waste your money on a repair man, 150.00 service call, Hell no. 65 bucks and your done. Before your wife can make you a pot of coffee this can be out and back in. I don't want to take money away from the appliance repair men but some repairs can be a DIY project. Nut driver and phillips screw driver is all you need.Hope this helps ya.

timer motor died

  • Customer: Paul from Moline, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I poped the outer cover off... Removed 3 screws and gently pulled the old timer out.... Also pulled out the ice maker arm.... Aligned the shaft of the tral to match the new motor assembly and gently slid it in... tightened the 3 screws and aligned the wire hoop back in the hole and the job was done... i pulled out the top freezer basket for easy access... Took less than 20 minutes total..The part was correct as usual.. Thank fellas

No water coming into ice maker

  • Customer: Ricardo from Hialeah Gardens, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
It was so simple, one screw to take the ice maker out and four screws for the motor. I ordered the motor because in your web site it suggested that 46% of the times its the motor the problem, I guess you could now say 47%. Got the part within 3 days. It was a pleasure doing business with your company. I recommended highly to everyone. Your web site was a lot of help.

Ice maker stopped working

  • Customer: Elmo from Palm Coast, FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
April 2012
My ice maker (2001 Whirlpool Gold side by side) stopped making ice. Using the model number (inside fridge, right wall), Google found the partselect website containing diagrams of the entire refrigerator. Using the "freezer liner" and "ice maker" diagrams, I discovered that electronic control boards, control and motor assembly, and water inlet valves could cause the ice maker to stop making ice. Since the LED lamps in the freezer liner were not working (diagnosis described as part of the emitter control board description), I replaced the emitter control boards first. After installation, the lights worked properly, according to the diagnosis, but still no ice. It seemed logical to next replace the control and motor assembly. About two hours after installation, the ice maker produced cubes, and has been working since. Each of the two parts orders from PartSupply came within 3 days, and were the correct parts for my machine. Installation illustrations were accurate and helpful

Ice maker not working

  • Customer: Gary from Plymouth, MN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Ordered the part recommended by your site, followed the instructions of the associated video and new ice is piling up right now. My only concern was no action for a time right after the install. Turns out the temperature of the freezer must drop back down to ?? before the ice maker starts to work. I was thinking maybe the electrical connection was not good. I choose to wait a night and see if change would occur. Freezer cooled down and ice maker started.

Gary

stopped producing ice

  • Customer: Walter from Palm Beach Gardens, FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Exactly as shown in the video; had a bit of trouble with the wiring harness, but all else went smoothly. If it were not for the explicit video installation instruction, it could not have been done by a do-it-yourself guy with tools. I had ice again in 3 hours! PartSelect is the absolute best when it comes to diagnosing, ordering and installing the part(s).

no ice, no water dispense into icemaker tray

  • Customer: nguyen from albuquerque, NM
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
My name is Tuan Nguyen. I have no ice and no water dispense into icemaker tray. I replace the the icemaker control and motor assembly. I unscrew a screw underneath the icemaker unit and disconnect the wire clip and pull out the icemaker assembly. I remover 3 screw from the motor assembly unit and replaced it with the new motor assembly. and installed the unit back in the compartment. It took about twenty min. It make me look good, that my wife knows i can fixed the problem without calling the repair men.
All Instructions for the 10656532400
1,366-1,380 of 1,499