Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 10654582400 > Parts

10654582400 Kenmore Refrigerator - Parts

All parts for the Kenmore Refrigerator 10654582400

Below is a list of all parts for the Kenmore Refrigerator 10654582400. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 10654582400
57-70 of 288
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$12.61

Ice Dispenser Motor Coupling

This part attaches to the drive shaft of the ice dispenser motor.

$6.85

Dispenser Door Pin

This dispenser door pin comes with the washer.

$15.91

BAFFLE

$42.08

Push-On Start Relay

This is a push-on start relay for your refrigerator. It attaches to the compressor and starts it by briefly boosting it. It will then shut off as soon as the motor is up to the required speed. You may need a new relay if your appliance is too warm or will not start. The tools you will need to make this repair include a flat-blade screwdriver and a pair of needle-nose pliers. This start relay measures to be just over one square inch.

$48.72

Heater, Defrost

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the ...

$128.60

Fresh Food Door Gasket

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$97.15

Air Diffuser

This part is controlled by the thermistor.

$96.02

Ice Mold

This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake resistant which prevents the coating on the mold from flaking into the ice cubes when the ice mold begins to wear. The ice mold forms the ice cubes and the heater allows the ice cubes to fall from the ice mold to drop them into the ice bucket. You will need to remove the ice maker from the refrigerator to access the mold and heater assembly. This is a genuine replacement part.

$28.64

Door, Ice Compartment

This is a decorative front cover that is made of plastic that covers the opening to where the icemaker is located and disables contact by the user while the icemaker is engaged.

$31.33

Water Filter Outlet Tube Kit

$4.87

Bottom Kickplate Clip

This clip is sold individually.

$57.76

Water Dispenser Reservoir Tubing

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

$120.58

Freezer Door Gasket - Black

This door gasket is used to seal the freezer door when closed.

$18.70

Ice Stripper

This is an authentic appliance part that is sourced directly from the genuine manufacturer. This ice stripper functions by stripping the ice maker mold of ice during the ejection cycle, after the water has frozen into cubes. The ice stripper rotates to push the cubes into the ice bucket and prevents the ice from falling back into the mold. You may need to replace the ice stripper if your ice maker is no longer making ice. This part is approximately 9 inches long and is sold individually.

All Parts for the 10654582400
57-70 of 288