Models > 10652554100

10652554100 Kenmore Refrigerator - Overview

Get Parts and Repair Help for 10652554100

If you know the refrigerator repair part you need, you can browse the list of all parts on the 10652554100, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 10652554100 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$53.93

Crisper Drawer with Humidity Control

The humidity control allows you to adjust the humidity within the crisper. This can extend the life of the vegetables/fruit.

Order within the next 1 hr and 36 mins and your part ships today!
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 1 hr and 36 mins and your part ships today!
$5.80

Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.

Order within the next 1 hr and 36 mins and your part ships today!
$112.51

Ice Maker Assembly - 8 Cube

This icemaker can be used with 25-27 cubic feet refrigerators that have a vertical auger dispenser located on the freezer door. Reuse bottom bracket from the original icemaker and attach to the new.

Order within the next 1 hr and 36 mins and your part ships today!
$5.91

Door Cam

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.

Order within the next 1 hr and 36 mins and your part ships today!
$53.86

Meat Pan with Handle

Sold individually.

Order within the next 1 hr and 36 mins and your part ships today!
$8.38

Control Bracket

This bracket holds the micro switches and the light in the freezer dispenser section.

Order within the next 1 hr and 36 mins and your part ships today!
$68.23

Water Inlet Valve

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. Note: This valve has been updated by the manufacturer and NO longer includes the removable pre-filter bracket connector. Must be ordered separately on PS3502196

Order within the next 1 hr and 36 mins and your part ships today!
$69.34

Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

Order within the next 1 hr and 36 mins and your part ships today!
$202.86

Electronic Control Boards - Emitter and Receiver

This set of two electronic control boards contains both the emitter and the receiver. These boards tells the icemaker when it's full and that it has to dump the ice, and it also tells the icemaker when to refill with water.

Order within the next 1 hr and 36 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

track of the pan become broken

  • Customer: Darrell from Cedar Bluff VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 386 of 388 people found this instruction helpful
Buy a new crisper pan,slide out old one ,slide in new one read more

No ice

  • Customer: Daniel from Suwanee GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 340 of 407 people found this instruction helpful
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours. read more

Ice maker stopped functioning

  • Customer: Phil from Auberry CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 267 of 278 people found this instruction helpful
Remove the icemaker service door... gently pry the door pins from the hinge sockets. Remove the 3 screws from the under side of the icemaker with a nut driver (1/4"). Gently remove the icemaker . It's a tight fit between the top of the compartment and the icemaker lower support tray. Next, disconnect the electrical connector at the right side. You're do... read more