10652282201 Kenmore Refrigerator - Instructions

The replacement part (new ice maker unit) orked perfectly fter insstall. The "Part Select" video on how to replace this unit was extremely helpful and actually convinced me to try it myself. I took the old unit out and just reversed the process and installed the new, replacement unit. Worked fine and wroks fine. (Note: it did take a full 24 hours or a little longer to actually start making ice. I think the ater supply drains off and takes a while to get back into the ice maker.)

Removed (snap on)removed screw, and ice dispencer side (door and Pin) You have to assemble to reinstall (not easy to install while assembled) Install the pivot pin the rest of the way with the new spring mounted and when unit is almost in place, install the pivot the rest of the way, install tension hold downs that old both the water and ice dispenser shafts, reinstall cover, reconnect wiring and test, I had to remove the plunger because the water wouldn't shut off fast enough. Unit works great now.

Put in new motot and control

Replace the auger drum. I had order it and the auger, but I did not need the auger. I returned the auger with ease. Parts Select will always have my business.

The plastic control bracket would not "lock" in place because the plastic detentes broke, not allowing the ice maker dispensing 'paddle' to engage the micro switches that allows the ice maker to eject ice. An easy repair of replacing the entire plastic control bracket.

repair went good .only had problem removing tube from clip in front

After our four year old refrigerator door wouldn't stay closed as a do it yourself kinda gal I found this website that assisted me in an easy and inexpensive fix. The "plastic" yes, "plastic" piece on the bottom of the door was worn down to nothing. My only suggestion is to call in your order, the customer service folks will help you order the right cam for your model. The next thing is to change both cams if you have a side by side. We changed the fridge side which fixed the problem, then realized the cam on the freezer needed to be changed to make it level. Great customer service!

exactly as shown on the video and it was completed in less than 10 minutes with only a nutdriver; took wife to dinner with the money saved and returned to find ice in bin without the "iceberg" from the prior leak! Thanks for the great parts selection, clear description of problems to help select correct fix and most of all the "how-to" video. I'm a customer for life ! WSD

Removed 3 screws pulled out the old part and replaced it with the new one. Then plugged in the refrigerator and the repair was complete.

I followed the really great repair video on this site. I would not have been able to do it without the video. Thanks very much for the video. Once I had the front panel off, it was relatively easy. Definitely would buy here again and attempt repairs myself. Very good experience! Very happy.

When very smoothly, as the video outlined the procedure.

I watched a video several time to get the steps in the removal and reinstall. It really was not that hard but first time repairs can take extra time.

turned off power unscrewed all the screw that mount ice maker, used flat head to release the clip on the wire harness, took out and exchanged the overfill wire, plugged the new unit in at wire harness, lined up and leveled ice maker tighten all the mounting screws, very simple repair i am very happy that you still had the orginal (OEM) ice maker, thanks Herb

Watched Video - took you through step by step

was really ease remove three scwes fron back panel plus two more screws from the water valve