Models > 10652274201 > Instructions

10652274201 Kenmore Refrigerator - Instructions

All Instructions for the 10652274201
1246 - 1260 of 1441
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water inlet valve leaked
Super simple repair, as it takes only a direct replacement of the valve. Removing and replacong the sdrews on the access cover took the majority of the repair time. Two screws retain the valve, and two electrical connections are very simple and easily reached. I would recoment using good sharp side cutters instaed of a knife to cut the three water lines.
Parts Used:
Water Inlet Valve Water Filter Cap
  • mark from newton, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken Auger
Was easy, removed several screws and a clip on the auger shaft. removed broken part and replace with new then reassembled
Parts Used:
Ice Bin Auger Drum
  • John from Columbus, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice maker quit making ice
I looked on line to see repair instruction videos on my refrigerator ice maker. When I saw how easy I went to PartSelect and order the part (control and motor assembly). I received the part in two days with the cheapest shipping option. My 33 yr old son was visiting when the delivery was made. After we opened the box, he went to the basement for tools and the rest is history. 10 minutes work and ice a couple of hours later! No problems since.
Parts Used:
Icemaker Control Assembly
  • Joseph from Lakewood, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
plastic auger broke apart
The only problem I had was the nut at the end turned the opposite direction. Once I realized that I took it apart in sequence and it went right back together. It helped me in that I slid all the parts off the auger shaft onto another small rod I had and then slid them right back on. Was no problem
Parts Used:
Ice Bin Auger Drum
  • Allen from Danville, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
no ice
Pulled out the old unit removed 3 screws waited about 3-4 hours had ice. Took over night until we were actually sureby then the ice bin was full. Easy repair!
Parts Used:
Icemaker Control Assembly
  • Gwenn from Middletown, DE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water ran all over freezer froze many times. Hair dryer to melt, Desaster!
Watched your AMAZNG detailed Video first. Ordered part received in two days,WOW! Pulled refrig. from wall unscrewed two screws, loosened third screw on hose, pulled hose out cut below metal incert. Took new part from package placed in back of refrig. placed new metal incert in hose replaced hose in new fitting. Turned water back on, plugged in refrig. No leaks pushed back to wall waited for while...VOILA!! ice cubes no mess to report. THANKS FOR SUCH AN AMAZING WEB SITE and SERVICE. TOM
Parts Used:
Ice Maker Water Fill Tube Kit
  • Thomas A from SAN DIEGO, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Ice door sticking open
I followed the really great repair video on this site. I would not have been able to do it without the video. Thanks very much for the video. Once I had the front panel off, it was relatively easy. Definitely would buy here again and attempt repairs myself. Very good experience! Very happy.
Parts Used:
Ice Guide
  • Peter from Sunapee, NH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No ice
When very smoothly, as the video outlined the procedure.
Parts Used:
Icemaker Control Assembly
  • James from Thorp, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator would not dispense ice
I watched a video several time to get the steps in the removal and reinstall. It really was not that hard but first time repairs can take extra time.
Parts Used:
Ice Bin Auger Drum
  • Paul from Fort Worth, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Ice maker not dispensing correctly
Watched Video - took you through step by step
Parts Used:
Ice Bin Auger Drum
  • Frank from Las Vegas, NV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
was liquing water where enter line for ice maker
was really ease remove three scwes fron back panel plus two more screws from the water valve
Parts Used:
Water Inlet Valve
  • Robert from Hialeah, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
plastic stopper came off arm
with a mirror to see the small hole on the front side of the icemaker.... very simple, took 1 minute
Parts Used:
ARM-SHUT
  • TinTina from Bruce, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped turning out ice
Removed three screws. Removed old part. Inserted new part and reinstalled three screws. Doesn't get much easier that
Parts Used:
Icemaker Control Assembly
  • James from Wasilla, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Cracked drawer
It was this simple. I removed the old drawer and slid the new one in place. I was simply amazed at how quickly I received the part. I ordered it on the 24th of July and received it on the26th.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Dan from Covington, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Fridge door wouldn't shut on its own
We logged on looking for a possible cause and solution. We found your website, diagnosed the problem, ordered the part and it came in two days. You even had a step by step video on how to change out the part. Kudos to you. Thank You
Parts Used:
Lower Door Closing Cam
  • Catherine from Strongsville, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10652274201
1246 - 1260 of 1441
Back to Top